Gunnibronco wrote:Did you want those dash pad screw holes filled?
No. It'll get a pad after paint.
project viperwolfe is starting
-
Viperwolf1
- Official CCB Member
- Posts: 1485
- Joined: Tue May 07, 2013 9:37 pm
Re: project viperwolfe is starting
No. It'll get a pad after paint.
-
Kinder
- Official CCB Member
- Posts: 4372
- Joined: Wed Sep 29, 2010 9:03 pm
-
Gunnibronco
- Official CCB Member
- Posts: 4077
- Joined: Mon Jan 03, 2011 5:07 pm
Re: project viperwolfe is starting
Looks great. Love that gauge.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
-
Rox Crusher
- Official CCB Member
- Posts: 3980
- Joined: Sun Oct 10, 2010 4:36 pm
Re: project viperwolfe is starting
FINAL PUSH , SUPER CELEBRATION OR BUST !
Phil gets back to town this Friday morning. He'll be packing some drivetrain goodies for various people and a bunch of parts to finish his Bronco.
This Saturday and Sunday looks like we will have good work weather so I would like to invite people out that would like to give a hand helping him. Mostly what is needed now is some body work, fitting, filling, and sanding. Mostly sanding. Might have to shoot some primer / sealer, etc. There are also other things to do so come on out and lend a hand.
Most week ends between now and when we leave will be dedicated to finishing up this great build.
If you wouldn't mind letting me or Phil know if you can come so we can make sure there is enough food and drink for everyone.
Thanks in advance !
Phil gets back to town this Friday morning. He'll be packing some drivetrain goodies for various people and a bunch of parts to finish his Bronco.
This Saturday and Sunday looks like we will have good work weather so I would like to invite people out that would like to give a hand helping him. Mostly what is needed now is some body work, fitting, filling, and sanding. Mostly sanding. Might have to shoot some primer / sealer, etc. There are also other things to do so come on out and lend a hand.
Most week ends between now and when we leave will be dedicated to finishing up this great build.
If you wouldn't mind letting me or Phil know if you can come so we can make sure there is enough food and drink for everyone.
Thanks in advance !
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
-
BroncoRaider
- Official CCB Member
- Posts: 536
- Joined: Thu Oct 22, 2015 10:47 am
Re: project viperwolfe is starting
I'll be there Sat, not sure about Sunday.
ΓÇ£BuddyΓÇ¥ - 1975 Bronco Sport, 302/Viperbuilt 4R70W/D20, Explorer EFI, More Patina than Paint...
-
Justin
- Official CCB Member
- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: project viperwolfe is starting
I'd like to try and make this. One day is booked for sure, not sure about the other.
-
cpldavis37
- Official CCB Member
- Posts: 357
- Joined: Sun Oct 16, 2011 6:45 pm
Re: project viperwolfe is starting
I will try and make it. Can you PM me your address?
TJ
"Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known."
F. Scott Fitzgerald
1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear
"Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known."
F. Scott Fitzgerald
1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear
-
Rox Crusher
- Official CCB Member
- Posts: 3980
- Joined: Sun Oct 10, 2010 4:36 pm
Re: project viperwolfe is starting
That's awesome guys !
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
-
Rox Crusher
- Official CCB Member
- Posts: 3980
- Joined: Sun Oct 10, 2010 4:36 pm
Re: project viperwolfe is starting
Did I mention there will be good beer in the fridge ?
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
-
Jesus_man
- Official CCB Member
- Posts: 5988
- Joined: Thu Nov 11, 2010 9:36 am
Re: project viperwolfe is starting
Wish I could make it!!
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
http://www.ucora.org
-
Dukietown
- Official CCB Member
- Posts: 523
- Joined: Wed Jun 08, 2011 11:24 am
Re: project viperwolfe is starting
I can't make it this weekend but will likely be able to make it for future weekends.
-
TOOLMAN
- Official CCB Member
- Posts: 768
- Joined: Mon Feb 14, 2011 9:29 am
Re: project viperwolfe is starting
I can't this weekend either...previous plans. Might be able to help out next weekend if you guys are still working.
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
-
Rox Crusher
- Official CCB Member
- Posts: 3980
- Joined: Sun Oct 10, 2010 4:36 pm
Re: project viperwolfe is starting
TOOLMAN wrote:I can't this weekend either...previous plans. Might be able to help out next weekend if you guys are still working.
We will either be working or dead from exhaustion.
Either way, come on over
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
-
Eck
- Official CCB Member
- Posts: 2462
- Joined: Thu Oct 25, 2012 8:33 pm
Re: project viperwolfe is starting
Are you guys going to be working during any weekdays next week? I might be able to get away for a while if you are...
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
-
Rox Crusher
- Official CCB Member
- Posts: 3980
- Joined: Sun Oct 10, 2010 4:36 pm
Re: project viperwolfe is starting
Eck wrote:Are you guys going to be working during any weekdays next week? I might be able to get away for a while if you are...
Phil for sure
Me if there aren't any spy satellites from my employer over head
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
-
Zenzone
- Official CCB Member
- Posts: 304
- Joined: Mon Oct 11, 2010 8:34 pm
Re: project viperwolfe is starting
Wish I could make it but I have classes all weekend for work. Good luck guys! Post lots of pics!
1976 Ranger Ford Bronco, 33's, 4 inch lift, Holly truck avenger 4 barrel 302, Sidewinder winch, on board air, amplified sound system, duel battery, CB radio,
Real Estate Agent at Lorin Properties Inc.
Zen@LorinProperties.com (303) 653-1541
Real Estate Agent at Lorin Properties Inc.
Zen@LorinProperties.com (303) 653-1541
-
Rox Crusher
- Official CCB Member
- Posts: 3980
- Joined: Sun Oct 10, 2010 4:36 pm
Re: project viperwolfe is starting
Jesus_man wrote:Wish I could make it!!
You would win the "furthest distance award" if you could !
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
-
Justin
- Official CCB Member
- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: project viperwolfe is starting
I'm not going to be able to make it either. Am on kid duty most of the weekend. They're cute, but tend to lose fingers in the garage.
-
D&D72
- Official CCB Member
- Posts: 989
- Joined: Sun Sep 11, 2011 9:49 pm
Re: project viperwolfe is starting
I may be able to make it next weekend.
That guy John.... whatta Jerk.
-
cpldavis37
- Official CCB Member
- Posts: 357
- Joined: Sun Oct 16, 2011 6:45 pm
Re: project viperwolfe is starting
Thanks for letting me help. Sorry I could not stay longer.
TJ
"Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known."
F. Scott Fitzgerald
1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear
"Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known."
F. Scott Fitzgerald
1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear
-
Viperwolf1
- Official CCB Member
- Posts: 1485
- Joined: Tue May 07, 2013 9:37 pm
Re: project viperwolfe is starting
With the help of Chuck, Tim, TJ and Keith we were able to get a lot of progress made this weekend. I had a bad case of Bronco lean going on so we were able to square up the radius arms and get it setting level yesterday. Today we sanded and smoothed the body. One more shot of primer and it should be ready for color.
-
Dukietown
- Official CCB Member
- Posts: 523
- Joined: Wed Jun 08, 2011 11:24 am
-
Rox Crusher
- Official CCB Member
- Posts: 3980
- Joined: Sun Oct 10, 2010 4:36 pm
Re: project viperwolfe is starting
Only ones I took
You do not have the required permissions to view the files attached to this post.
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
-
Rox Crusher
- Official CCB Member
- Posts: 3980
- Joined: Sun Oct 10, 2010 4:36 pm
Re: project viperwolfe is starting
Garage is open this week end !
The latest schedule has Viper's Bronco headed off to paint this coming Thursday afternoon. It is supposed to be done over the week end.
We are going to put another coat of primer on it tomorrow (too cold and snowy today). We could really use some extra hands for sanding on Sunday afternoon.
So, please come lend a hand if you can !
The latest schedule has Viper's Bronco headed off to paint this coming Thursday afternoon. It is supposed to be done over the week end.
We are going to put another coat of primer on it tomorrow (too cold and snowy today). We could really use some extra hands for sanding on Sunday afternoon.
So, please come lend a hand if you can !
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
-
Moab Mike
- Official CCB Member
- Posts: 1945
- Joined: Mon Jan 03, 2011 1:59 pm
Re: project viperwolfe is starting
Rox Crusher wrote:Garage is open this week end !
The latest schedule has Viper's Bronco headed off to paint this coming Thursday afternoon. It is supposed to be done over the week end.
We are going to put another coat of primer on it tomorrow (too cold and snowy today). We could really use some extra hands for sanding on Sunday afternoon.
So, please come lend a hand if you can !
If I wasn't so busy moving I'd be there.
-
Viperwolf1
- Official CCB Member
- Posts: 1485
- Joined: Tue May 07, 2013 9:37 pm
Re: project viperwolfe is starting
Final priming is done. Big thanks to Keith for shooting it.
We also found some time to get Rox's 351W mostly together.
We also found some time to get Rox's 351W mostly together.
You do not have the required permissions to view the files attached to this post.
-
landshark
- Official CCB Member
- Posts: 3942
- Joined: Thu Oct 13, 2011 11:16 pm
Re: project viperwolfe is starting
Looks great guys!
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
-
Digger
- Official CCB Member
- Posts: 1282
- Joined: Fri Jun 21, 2013 7:53 pm
Re: project viperwolfe is starting
Looking good!
Cummins R2.8 diesel, ZF5, AtlasII, HP44/BB9, ARBs, coiled / linked suspension, 37" KO2s, full cage, bumpers, etc.
Build Thread: http://www.coloradoclassicbroncos.com/viewtopic.php?f=3&t=5420
Average 23.5 mpg, Best tank: 26.3 mpg
Build Thread: http://www.coloradoclassicbroncos.com/viewtopic.php?f=3&t=5420
Average 23.5 mpg, Best tank: 26.3 mpg
-
Rox Crusher
- Official CCB Member
- Posts: 3980
- Joined: Sun Oct 10, 2010 4:36 pm
Re: project viperwolfe is starting
It was very exciting to see it all in one "color".
I'm traveling this week and won't get to see it again until its final color.
ANXIOUS !
I'm traveling this week and won't get to see it again until its final color.
ANXIOUS !
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
-
Viperwolf1
- Official CCB Member
- Posts: 1485
- Joined: Tue May 07, 2013 9:37 pm
Re: project viperwolfe is starting
That reminds me...I need to get some paint.
BTW, it's not all one color any more.
BTW, it's not all one color any more.
You do not have the required permissions to view the files attached to this post.