project viperwolfe is starting

Post by **Rox Crusher** » Wed Mar 30, 2016 6:02 pm

All I know is that the pictures don't do it justice

Post by **landshark** » Wed Mar 30, 2016 9:05 pm

If you need a 9" yoke I have one off my big bearing 9" Currie from my 69 that I replaced with a 1350 you can have.

Post by **Jesus_man** » Thu Mar 31, 2016 12:00 am

I see an OBA connection there! Did you mention your execution of that? York or electric pump? Tank? Either way, I have always thought of putting a port somewhere on the exterior of the bronco. I would also need to extend the wiring and put the switch inside the cab as opposed to under the hood.

Post by **Viperwolf1** » Thu Mar 31, 2016 7:08 am

Jesus_man wrote:I see an OBA connection there! Did you mention your execution of that? York or electric pump? Tank? Either way, I have always thought of putting a port somewhere on the exterior of the bronco. I would also need to extend the wiring and put the switch inside the cab as opposed to under the hood.

Just a simple idea of using an unused port on the ARB compressor. No solenoid so it will have pressure whenever the compressor is on. I'll run the quick connect somewhere inside the front bumper.

Post by **Viperwolf1** » Thu Mar 31, 2016 10:12 am

Got the grill on.

20160331_105918.jpg

Post by **Kinder** » Thu Mar 31, 2016 10:40 am

Very nice, It'll be near 70 this weekend, time to stretch its legs!

Post by **Aztec77Bronco** » Thu Mar 31, 2016 11:23 am

Viperwolf1 wrote:Got the grill on.
20160331_105918.jpg

That is shaping up to be an incredible rig!

Post by **Digger** » Thu Mar 31, 2016 11:46 am

That is very purdy. Nice work!

Post by **B.O.B.** » Thu Mar 31, 2016 1:37 pm

If you need help on Saturday I can swing by.

Post by **hockeydad4-22** » Thu Mar 31, 2016 1:44 pm

casadejohnson wrote:I think Rusty is just green with envy and decided to punish you for it.

Sent from my iPhone using Tapatalk

They will do that when you have more than one and spend time with the other....

Post by **Viperwolf1** » Thu Mar 31, 2016 3:26 pm

B.O.B. wrote:If you need help on Saturday I can swing by.

That would be fantastic. The list of things to do is still pretty long; prep and paint cages and bumpers, install carpet, install soft top, mirrors, glass, etc. Jeff will also attempt to squeeze a 351w into too small of a space. Then the body lift will get installed.

Post by **ZOSO** » Thu Mar 31, 2016 5:07 pm

Viperwolf1 wrote:
B.O.B. wrote:If you need help on Saturday I can swing by.

That would be fantastic. The list of things to do is still pretty long; prep and paint cages and bumpers, install carpet, install soft top, mirrors, glass, etc. Jeff will also attempt to squeeze a 351w into too small of a space. Then the body lift will get installed.

Cant forget the run to bh for a hood/scoop to clear.

Post by **Rox Crusher** » Thu Mar 31, 2016 5:29 pm

ZOSO wrote:
Viperwolf1 wrote:
B.O.B. wrote:If you need help on Saturday I can swing by.

That would be fantastic. The list of things to do is still pretty long; prep and paint cages and bumpers, install carpet, install soft top, mirrors, glass, etc. Jeff will also attempt to squeeze a 351w into too small of a space. Then the body lift will get installed.

Cant forget the run to bh for a hood/scoop to clear.

Contingency scoop already droning to me by Amazon

Post by **Viperwolf1** » Fri Apr 01, 2016 7:33 pm

Got the front end all buttoned up.

20160401_165935.jpg

Post by **landshark** » Fri Apr 01, 2016 7:47 pm

Nice I will be dropping by tomorrow can't wait to see it in person

Post by **Kinder** » Sat Apr 02, 2016 4:48 pm

Looks better every day, did you source a soft top yet?

Post by **landshark** » Sat Apr 02, 2016 6:40 pm

Post by **Viperwolf1** » Sat Apr 02, 2016 6:55 pm

Big thanks to Bobby, Tim, Shawn and Chris for getting the bumpers and cage ready to bolt on. Jeff just played with his new engine the whole day.

20160402_185739.jpg

20160402_185757.jpg

Post by **BroncoRaider** » Sat Apr 02, 2016 6:58 pm

Phil you look so relieved!

Post by **Digger** » Sat Apr 02, 2016 7:49 pm

Beautiful

Post by **landshark** » Sat Apr 02, 2016 9:39 pm

Ha nice getting the bumper on

Post by **Rox Crusher** » Sun Apr 03, 2016 6:42 am

landshark wrote:Ha nice getting the bumper on

It fit really nicely despite condition of the frame ends.

Ran out of steam for getting the front one on.

That should get done today.

Post by **EFI Guy** » Sun Apr 03, 2016 10:12 pm

Looks amazing!

Post by **mickphatmac** » Wed Apr 06, 2016 7:52 am

4 days, No Pics?
C'mon, don't be modest!!!

Post by **landshark** » Wed Apr 06, 2016 9:19 am

Tic Toc... Tic Toc!

Post by **hockeydad4-22** » Wed Apr 06, 2016 1:11 pm

Its like an episode of overhaulin' over at Jeff's house, lots to do and the deadline is swiftly approaching for the big reveal day.....

Rest assured, she sure is purdy, but you may have to wait for the super celebration threads to see finished product (as if that ever happens) pics are posted

Post by **Rox Crusher** » Thu Apr 07, 2016 8:44 pm

mickphatmac wrote:4 days, No Pics?
C'mon, don't be modest!!!

Patience my friends.........

Post by **Eck** » Thu Apr 07, 2016 8:49 pm

Rox Crusher wrote:
mickphatmac wrote:4 days, No Pics?
C'mon, don't be modest!!!

Patience my friends.........

Lame.

Post by **hockeydad4-22** » Thu Apr 07, 2016 9:06 pm

You could head over and help install a few parts you can check it out in person.....

Just one more day left before it heads east to TN

fire fire

Post by **Eck** » Thu Apr 07, 2016 9:34 pm

hockeydad4-22 wrote:You could head over and help install a few parts you can check it out in person.....

Just one more day left before it heads east to TN

Yah- guess I should've waited to help with the finishing touches. I've got my own long list of things to do on my rig to have it ready for Moab.

Have fun guys!

www.ColoradoClassicBroncos.com

project viperwolfe is starting

Re: project viperwolfe is starting

project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting