I was wondering if anyone knows what these might be?
I do know one thing they are made of lead.
Does anyone know what these could be ?
-
cravenbronco
- Official CCB Member

- Posts: 916
- Joined: Sat Apr 19, 2014 4:40 pm
Does anyone know what these could be ?
You do not have the required permissions to view the files attached to this post.
- Kinder
- Official CCB Member

- Posts: 4372
- Joined: Wed Sep 29, 2010 9:03 pm
Re: Does anyone know what these could be ?
Looks like fun, get a caliper out & chk the dia.
Best to Date MPG: 26.6
- Digger
- Official CCB Member

- Posts: 1282
- Joined: Fri Jun 21, 2013 7:53 pm
Re: Does anyone know what these could be ?
lol, where did you find those?
2x on the caliper measurements. I'd be curious what is suppose to be firing those, but they look like home cast boolits
2x on the caliper measurements. I'd be curious what is suppose to be firing those, but they look like home cast boolits
Cummins R2.8 diesel, ZF5, AtlasII, HP44/BB9, ARBs, coiled / linked suspension, 37" KO2s, full cage, bumpers, etc.
Build Thread: http://www.coloradoclassicbroncos.com/viewtopic.php?f=3&t=5420
Average 23.5 mpg, Best tank: 26.3 mpg
Build Thread: http://www.coloradoclassicbroncos.com/viewtopic.php?f=3&t=5420
Average 23.5 mpg, Best tank: 26.3 mpg
-
cravenbronco
- Official CCB Member

- Posts: 916
- Joined: Sat Apr 19, 2014 4:40 pm
Re: Does anyone know what these could be ?
I will get the diameter reading on them and post what they are.
I found them in the driver side heat box I opened the door and there they were.
It would be nice to know roughly how old they are
I found them in the driver side heat box I opened the door and there they were.
It would be nice to know roughly how old they are
- Kinder
- Official CCB Member

- Posts: 4372
- Joined: Wed Sep 29, 2010 9:03 pm
Re: Does anyone know what these could be ?
3 on the left look modern, who knows on the other 2.
Best to Date MPG: 26.6
- GB67
- Official CCB Member

- Posts: 12
- Joined: Sun Jan 06, 2013 4:35 pm
Re: Does anyone know what these could be ?
They look like black power rifle bullets, some look like the 50cal size
1967 Bronco Sport
set up with...
1991 Mustang 5.0 EFI - NP435 - D20 - 4.88 D44 OX Lock - 4.86 Currie High 9 Detroit Lock - 4 wheel disc brakes - 37" M16 on 15 incher's
set up with...
1991 Mustang 5.0 EFI - NP435 - D20 - 4.88 D44 OX Lock - 4.86 Currie High 9 Detroit Lock - 4 wheel disc brakes - 37" M16 on 15 incher's
-
cravenbronco
- Official CCB Member

- Posts: 916
- Joined: Sat Apr 19, 2014 4:40 pm
Re: Does anyone know what these could be ?
Here are the diamentions as they sit in the picture form left to right
1. 0.3135 =8mm
2. 0.3795 = 9.65mm
3. 0.3150 = 8.52mm
4. 0.3230 = 8.20mm
5. 0.4495 = 11.41
1. 0.3135 =8mm
2. 0.3795 = 9.65mm
3. 0.3150 = 8.52mm
4. 0.3230 = 8.20mm
5. 0.4495 = 11.41
- sykanr0ng
- Official CCB Member

- Posts: 405
- Joined: Thu Jan 22, 2015 12:46 am
Re: Does anyone know what these could be ?
cravenbronco wrote:Here are the diamentions as they sit in the picture form left to right
1. 0.3135 =8mm
2. 0.3795 = 9.65mm
3. 0.3150 = 8.52mm
4. 0.3230 = 8.20mm
5. 0.4495 = 11.41
My guesses:
1. 303 British
2. 38-55 Winchester
3. some .32 caliber pistol/revolver cartridge
4. 7.92x57 Mauser
5. ? possibly some 11.*mm European black powder revolver ?
"You say overkill like it's a bad thing."
-
cravenbronco
- Official CCB Member

- Posts: 916
- Joined: Sat Apr 19, 2014 4:40 pm
Re: Does anyone know what these could be ?
sykanr0ng wrote:cravenbronco wrote:Here are the diamentions as they sit in the picture form left to right
1. 0.3135 =8mm
2. 0.3795 = 9.65mm
3. 0.3150 = 8.52mm
4. 0.3230 = 8.20mm
5. 0.4495 = 11.41
My guesses:
1. 303 British
2. 38-55 Winchester
3. some .32 caliber pistol/revolver cartridge
4. 7.92x57 Mauser
5. ? possibly some 11.*mm European black powder revolver ?
Very cool I didn't know what they were thanks everyone