Annual CCB Swap Meet and June Breakfast

Post by **Justin** » Fri May 26, 2017 9:03 pm

It's swap meet time! We'll go back to an old haunt with an ideal parking lot. Bring out all your old, random parts so that you can take home someone else's old, random parts instead!

When: 6/17/17 @ 0900.
Where: Golden Corral-3677 S Santa Fe Dr, Sheridan, CO 80110
How: In whatever vehicle carries the most old junk.
Why: Because it's the one time per year you have to eat Golden Corral's food.

This is one of the better attended events each year, so it's also a great chance to catch up and lay eyes on a bunch of nice EB's. Hope to see everyone there!

Post by **cravenbronco** » Sat May 27, 2017 5:49 am

Does anyone need a D20 J shift transfer case?
Also have a few three speed transmissions that I need to get rid of to make room. I also have a bunch of misc items that I will bring with me.

I will not be bringing the transmission's or transfer case
Unless someone wants one. Just let me know to bring it if it'sΓÇï wanted.
Thanks
Sincerely Matt

mike1040 · Post by **mike1040** » Sun May 28, 2017 5:19 am

What is the price and condition of the transfer case?

Post by **RJLougee** » Sun Jun 04, 2017 3:27 pm

You would have to schedule this the same day as the Dirt Riot Race at RAM Offroad down here.

Decisions, decisions....

Post by **Lobobronco** » Sat Jun 10, 2017 6:39 pm

Good Evening All,

Anybody from up Noth headed down? Kinder has a hitch for me. I live in Boulder, but work in Loveland across from the Center of the Rockies hospital and can meet anywhere in between.

Thanks to all and have a great weekend!

Matt

Post by **phyler** » Sat Jun 10, 2017 7:48 pm

Lobobronco wrote:Good Evening All,

Anybody from up Noth headed down? Kinder has a hitch for me. I live in Boulder, but work in Loveland across from the Center of the Rockies hospital and can meet anywhere in between.

Thanks to all and have a great weekend!

Matt

Matt, I got you covered. I'll pick it up for you.

Sent from my HTC One using Tapatalk

Post by **Lobobronco** » Sat Jun 10, 2017 8:07 pm

Awesome...Thank you Sir!

mustangjonny84 · Post by **mustangjonny84** » Sun Jun 11, 2017 11:52 am

Post by **ZOSO** » Tue Jun 13, 2017 1:18 pm

Im in. I have some misc items i'll be bringing.

Post by **Digger** » Tue Jun 13, 2017 8:37 pm

I'll be there.

I have a 650 Holley w/ TA crossover vent and a roller cam to sell. Probably some other stuff laying around the garage too.

Post by **66Crawler** » Wed Jun 14, 2017 10:14 pm

I will be there bringing lots of parts.

I am also looking for lots of parts.

Post by **cravenbronco** » Thu Jun 15, 2017 7:30 am

I will more than likely be coming with the back of my truck full of parts.

tillbuilt · Post by **tillbuilt** » Thu Jun 15, 2017 11:57 am

Ok guys and girls. After 35 years of playing with these great steads, I am calling it quits. I have cleaned out the garage and bring it all to the swap. Including my bronco. I have no intention of leaving with anything!!!!

Toby Till
303-519-3222

I will have a silent auction sign up sheet for the Bronco. Place your bid an we will see if you will take it home.

Loaded on the trailer and headed to the Swap Meet to start a new chapter in someone else's life. It's been a great 25 years, but you haven't been to the trails in 10. It's time to move on.

Make a real offer. I am taking my offers until Saturday afternoon. I will sell it to the highest offer at the end of the Classic Bronco swap meet.

When: 6/17/17 @ 0900.
Where: Golden Corral-3677 S Santa Fe Dr, Sheridan, CO 80110

35 spline king pin Dana 60's w ARB's front and rear, Hummer bead lock rims, 38x12.50x16.5, hydro boost, discs on al four corners, Long arms, Air bag buggy spring rear. Coil spring front, w pivoting spring saddles, 351w w holly fuel injection, custom cage, custom bumpers, w Warn 8274 with custom wide spool, premier power welder, hydraulic clutch,

Toby Till
303-519-3222

Sent from my iPhone using Tapatalk

Just1more · Post by **Just1more** » Thu Jun 15, 2017 5:15 pm

cravenbronco wrote:I will more than likely be coming with the back of my truck full of parts.

Well a lot more than expected. I really don't want to bring anything back home if possible.

Post by **EFI Guy** » Thu Jun 15, 2017 8:18 pm

I'll be there, probably only bringing a few things to sell since I don't know what to keep and what to pitch yet.

Are we doing a club scrap metal drive again this year? I've got an engine block and some copper wire for the cause if so.

Post by **phyler** » Thu Jun 15, 2017 8:48 pm

EFI Guy wrote:I'll be there, probably only bringing a few things to sell since I don't know what to keep and what to pitch yet.

That is my story as well. I'll be bringing some cash in case I find that part I forgot I needed, like a good passenger fender or something like that.

Sent from my Venue 8 7840 using Tapatalk

Post by **Kinder** » Fri Jun 16, 2017 5:43 am

EFI Guy wrote:Are we doing a club scrap metal drive again this year? I've got an engine block and some copper wire for the cause if so.

I'm bringing my bronco trailer, it'll hold a little scrap, but if someone is willing to offer up a truck and follow me over to the recycler that'd be cool.

Post by **landshark** » Fri Jun 16, 2017 7:08 am

I think 66crawler is bringing a scrap trailer.

Unfortunately I will be out of town but looks like it will be a great turn out!

Post by **TOOLMAN** » Fri Jun 16, 2017 7:45 am

I'll be there...Bronco is alreasy packed full of parts!

Post by **Kinder** » Fri Jun 16, 2017 10:07 am

I hope those that had parts delivered by Gunni to my place will be there, if not your parts will miss you terribly!

Post by **Gregg** » Fri Jun 16, 2017 4:01 pm

phyler wrote:
Lobobronco wrote:Good Evening All,

Anybody from up Noth headed down? Kinder has a hitch for me. I live in Boulder, but work in Loveland across from the Center of the Rockies hospital and can meet anywhere in between.

Thanks to all and have a great weekend!

Matt

Matt, I got you covered. I'll pick it up for you.

Sent from my HTC One using Tapatalk

So could I. I'm in Lyons now.

Post by **Digger** » Fri Jun 16, 2017 8:08 pm

Digger wrote:I'll be there.

I have a 650 Holley w/ TA crossover vent and a roller cam to sell. Probably some other stuff laying around the garage too.

Well guys, I have to bow out. Had an extended family member go into the hospital and we are hosting out of town visitors right now.

Post by **cdj7k** » Fri Jun 16, 2017 8:19 pm

Guys, i am planning on heading up from the springs to meet up with you all for the first time. I am working most saturday mornings when you connect for breakfast so looking forward to hanging out a bit.

Most of my accumulation i am holding onto til i have my final plan, but i do have some crawler worthy fenders i can bring up. Cheap

Also a prerunner style bumper, but it has a little taller hoop than normal. $100 bucks if anyone is interested.

Right now i am looking for a tight set of hinges and a drivers rear flare if i can find it or a pair of rear if somebody has that.

Post by **Rox Crusher** » Fri Jun 16, 2017 9:18 pm

Gregg wrote:
phyler wrote:
Lobobronco wrote:Good Evening All,

Anybody from up Noth headed down? Kinder has a hitch for me. I live in Boulder, but work in Loveland across from the Center of the Rockies hospital and can meet anywhere in between.

Thanks to all and have a great weekend!

Matt

Matt, I got you covered. I'll pick it up for you.

Sent from my HTC One using Tapatalk

So could I. I'm in Lyons now.

Crap, there goes Lyon.

tillbuilt · Post by **tillbuilt** » Sat Jun 17, 2017 2:17 pm

Who is the fellow with the 4 door bronco and trailer today. I was wanting to let him know his DS front wheel was wobbling going down the road when he passed me on Sante Fe. Take a look at it before your next outing. You could have a ball joint or wheel bearing going.

Sent from my iPhone using Tapatalk

Post by **ZOSO** » Sat Jun 17, 2017 2:34 pm

tillbuilt wrote:Who is the fellow with the 4 door bronco and trailer today. I was wanting to let him know his DS front wheel was wobbling going down the road when he passed me on Sante Fe. Take a look at it before your next outing. You could have a ball joint or wheel bearing going.

Sent from my iPhone using Tapatalk

That would be kinder.

Post by **Kinder** » Mon Jun 19, 2017 4:21 am

tillbuilt wrote:Who is the fellow with the 4 door bronco and trailer today. I was wanting to let him know his DS front wheel was wobbling going down the road when he passed me on Sante Fe. Take a look at it before your next outing. You could have a ball joint or wheel bearing going.

Sent from my iPhone using Tapatalk

Thanks for heads up, fixed.

Post by **ZOSO** » Mon Jun 19, 2017 1:34 pm

kinder wrote:
tillbuilt wrote:Who is the fellow with the 4 door bronco and trailer today. I was wanting to let him know his DS front wheel was wobbling going down the road when he passed me on Sante Fe. Take a look at it before your next outing. You could have a ball joint or wheel bearing going.

Sent from my iPhone using Tapatalk

Thanks for heads up, fixed.

Hope it was something simple.

Post by **Gunnibronco** » Mon Jun 19, 2017 9:39 pm

kinder wrote:
tillbuilt wrote:Who is the fellow with the 4 door bronco and trailer today. I was wanting to let him know his DS front wheel was wobbling going down the road when he passed me on Sante Fe. Take a look at it before your next outing. You could have a ball joint or wheel bearing going.

Sent from my iPhone using Tapatalk

Thanks for heads up, fixed.

Swap in the 60?

Post by **Kinder** » Tue Jun 20, 2017 3:43 am

Gunnibronco wrote:
kinder wrote:Thanks for heads up, fixed.

Swap in the 60?

Haha, close, it should happen this month, thanks for the gears.

www.ColoradoClassicBroncos.com