Fuel pressure in cab
- Jesus_man
- Official CCB Member

- Posts: 5988
- Joined: Thu Nov 11, 2010 9:36 am
Fuel pressure in cab
Looking at options for getting a fuel pressure gauge in the cab, on a budget. I see some very expensive options out there, but was wanting to see what others have done and perhaps someone has a great idea that I can use.
Aside from the ebay ones that come with a sender, I am not sure which way to go.
https://www.ebay.com/itm/52mm-Smoked-4- ... 2548.l4275
Aside from the ebay ones that come with a sender, I am not sure which way to go.
https://www.ebay.com/itm/52mm-Smoked-4- ... 2548.l4275
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
http://www.ucora.org
- Moab Mike
- Official CCB Member

- Posts: 1945
- Joined: Mon Jan 03, 2011 1:59 pm
Re: Fuel pressure in cab
I bet you hard plumb a tube from the fuel rail 1/16ΓÇ¥ port through the firewall to a dash mounted fuel guage. The only issue would be a potential leak pouring over your hot motor or inside the cab. You would need a flexible vibration dampener too.
- Jesus_man
- Official CCB Member

- Posts: 5988
- Joined: Thu Nov 11, 2010 9:36 am
Re: Fuel pressure in cab
I have been told running a fuel line into the cab is a no-no.
That's why I was targeting something with a sender.
That's why I was targeting something with a sender.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
http://www.ucora.org
- Viperwolf1
- Official CCB Member

- Posts: 1485
- Joined: Tue May 07, 2013 9:37 pm
Re: Fuel pressure in cab
Use a cheap oil pressure gauge and sender.
- Jesus_man
- Official CCB Member

- Posts: 5988
- Joined: Thu Nov 11, 2010 9:36 am
Re: Fuel pressure in cab
Viperwolf1 wrote:Use a cheap oil pressure gauge and sender.
I was wondering if that wouldn't work...
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
http://www.ucora.org
- Viperwolf1
- Official CCB Member

- Posts: 1485
- Joined: Tue May 07, 2013 9:37 pm
- Jesus_man
- Official CCB Member

- Posts: 5988
- Joined: Thu Nov 11, 2010 9:36 am
Re: Fuel pressure in cab
I wish I knew why the same idea for fuel is so much more expensive?
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
http://www.ucora.org
- Kinder
- Official CCB Member

- Posts: 4372
- Joined: Wed Sep 29, 2010 9:03 pm
Fuel pressure in cab
Another cheap option from Glowshift, $60 for their fuel pressure gauge.
https://www.glowshiftdirect.com/tinted- ... ure-gauge/
I have their combo gauge in BSD for boost, pyro & fuel pressure, itΓÇÖs held up for 2 years so far.
https://www.glowshiftdirect.com/tinted- ... ure-gauge/
I have their combo gauge in BSD for boost, pyro & fuel pressure, itΓÇÖs held up for 2 years so far.
Best to Date MPG: 26.6
- Jesus_man
- Official CCB Member

- Posts: 5988
- Joined: Thu Nov 11, 2010 9:36 am
Re: Fuel pressure in cab
Ironically, I found that exact gauge on ebay. Sorta assumed it was refurb'd, but apparently it's the same price on their site...
Might be worth the extra few dollars for stuff rated for fuel. It's the way I am leaning since anything else sold on ebay at the price has no warranty and bad engrish ads
Might be worth the extra few dollars for stuff rated for fuel. It's the way I am leaning since anything else sold on ebay at the price has no warranty and bad engrish ads
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
http://www.ucora.org
- Jesus_man
- Official CCB Member

- Posts: 5988
- Joined: Thu Nov 11, 2010 9:36 am
Re: Fuel pressure in cab
Kinder wrote:Another cheap option from Glowshift, $60 for their fuel pressure gauge.
https://www.glowshiftdirect.com/tinted- ... ure-gauge/
I have their combo gauge in BSD for boost, pyro & fuel pressure, itΓÇÖs held up for 2 years so far.
I have partially installed this. Need to hook up the two power wires (12v and headlights) and I had to order a single gauge pod and I'll install it under the dash for now. Aside from the pod, I should have it working today.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
http://www.ucora.org