351W heads - Gone!

[pgilbeau]

I have a pair of 351W heads I got from Eck that I am not going to use at this point. May have been rebuilt? Free!

[mickphatmac]

IΓÇÖm definitely interested!
Do you or anyone else know it they will fit a stock 302 with stock exhaust manifolds?

[phyler]

IΓÇÖm definitely interested!
Do you or anyone else know it they will fit a stock 302 with stock exhaust manifolds?

Assuming they are the typical E7 head, they should fit. Not sure if you would need to change push rods though.

Sent from my Pixel 2 using Tapatalk

[mickphatmac]

Maybe Eck would know?

[Eck]

Maybe Eck would know?

They are the E7 heads I believe but not sure if theyΓÇÖll fit the 302 or not. They came off my 351 when I put the GT40 heads on. IΓÇÖd bet theyΓÇÖd work.


Sent from my iPhone using Tapatalk

[pgilbeau]

They are the E7 heads I believe but not sure if theyΓÇÖll fit the 302 or not. They came off my 351 when I put the GT40 heads on. IΓÇÖd bet theyΓÇÖd work.

We will go with that info. Cravenbronco PM'd me first, if he doesn't take them I will PM whoever was next.

[pgilbeau]

Pending pick up

[EFI Guy]

Keep in mind the 351 heads will have bigger holes for the head bolts than the 302. They make several different styles of kits to address the issue. Everything from special bolts to stepped washers. This is probably the cheapest solution:

https://www.alexsparts.com/head-bolt-re ... -bushings/

[mickphatmac]

Keep in mind the 351 heads will have bigger holes for the head bolts than the 302. They make several different styles of kits to address the issue. Everything from special bolts to stepped washers. This is probably the cheapest solution:

https://www.alexsparts.com/head-bolt-re ... -bushings/

ThatΓÇÖs cool, good to know!
Thanks!

[pgilbeau]

Gone!