Rear storage options

[horseplay]

Just removed my rear seat and looking for storage options & ideas.

[ScottBarnes]

I used this SmittyBilt Box for our Baja trip. Worked great. Jeff used one in his also, and I think it worked out well for him. They are light (made from aluminum), lockable and don't cost a fortune. And they leave room for other stuff. I mounted mine more toward the seats so I could have boxes accessible via the liftgate. Jeff put his close to the tailgate. Just personal preference.

[horseplay]

Thanks for the pics Scott I'm assuming those are lashing rings on the top of the box.

[ScottBarnes]

Thanks for the pics Scott I'm assuming those are lashing rings on the top of the box.

yep - and they are super heavy and spring loaded so they donΓÇÖt rattle.

[ZOSO]

I built a nice box for pretty cheap. 2 drawers. I dont have pics but will get them tomorrow. A few things i'd change but couldnt be happier.

[pgilbeau]

It seems they make a number of these boxes. Any chance you could provide a part number?

[ScottBarnes]

It seems they make a number of these boxes. Any chance you could provide a part number?

It's Secure Lock Box - Part # S/B2761

I bought it from Smittybilt Depot for about $385 w/free shipping.

[landshark]

YouΓÇÖve seen mine, held up great but will eventually replace it with an aluminum version that isnΓÇÖt as tall.

[horseplay]

Thanks Guys for all the pics & info is great any beta on your set ups is appreciated pro or con.

[Rox Crusher]

I really like my smittybuilt box and it worked great for the Baja trip.

Now I am just trying to decide if I leave it in or put the seat back in so the kids can ride with me and bang their heads on the roll cage.

[ZOSO]

Here is mine. It has been a great addition. Allows me to have all my camping gear loaded and if I need a tool I don't have to unload the whole truck. I made it 36" long 11" tall and 39" wide. Cost was cheap to build. 24" drawer slides.

[horseplay]

That looks great is that lock track on the top.

[ZOSO]

Yes it is a rail kit on top to strap down coolers and stuff.

https://www.discountramps.com/tie_down_rails/p/TRAK8/

[landshark]

Here is mine. It has been a great addition. Allows me to have all my camping gear loaded and if I need a tool I don't have to unload the whole truck. I made it 36" long 11" tall and 39" wide. Cost was cheap to build. 24" drawer slides.

Great job! Love it.

[ZOSO]

Here is mine. It has been a great addition. Allows me to have all my camping gear loaded and if I need a tool I don't have to unload the whole truck. I made it 36" long 11" tall and 39" wide. Cost was cheap to build. 24" drawer slides.

Great job! Love it.

Thanks Chris. It has worked out great. I thought about making it a big single drawer like you did but was afraid I'd cram too much in there weight wise and the slides wouldnt hold.

[landshark]

I did one drawer because frankly I donΓÇÖt have the skills or equipment to make precise cuts and knew one drawer was easier if things werenΓÇÖt quite square. I bought heavy duty 500lb locking slides to compensate for the weight. Sure enough my setup is a little ΓÇ£offΓÇ¥ but I got it to work. Lol.

My do over will be to cut it down to the height of the wheel wells like yours. Although I do like the fact I can store oil and other fluids upright. Maybe one day I will build an aluminum version but we will see. For now it stores allot of stuff.

[ZOSO]

I designed it for 2 slides on each side. I only added one right now.

Oh thing I would change is possibly shorten it in length. I'd like my small cooler to be able to sit on the floor in front of the box.

[ScottBarnes]

IΓÇÖve decided now that the Baja trip is done, IΓÇÖm going to put my rear seat back in and am selling my box if anyone is interested. $225.


Sent from my iPad using Tapatalk