Black Smoke Donkey

[millerpz]

Oh and I have an 89 (same as a 91) if measuring one would help.

[Kinder]

Thanks, IΓÇÖll check the listing out.

[Kinder]

Housing is toast. I know itΓÇÖs a long shot but if anyone has a lead on a 1978-1979 D60 housing or complete axle let me know.

Dang. Is the center section messed up?

I missed this, yes, he (they) said the center section was also bent.

IΓÇÖve got a tip on another complete axle, IΓÇÖll post up if I get my hands on it.

[BroncoCrawler]

https://www.facebook.com/groups/rockcra ... 6119839334

Sent from my Pixel 3 XL using Tapatalk

[Kinder]

https://www.facebook.com/groups/rockcrawlingclassifieds/permalink/2303956119839334/?sale_post_id=2303956119839334

Sent from my Pixel 3 XL using Tapatalk

Private Group, something there worth joining for?

[BroncoCrawler]

It's ok just depends how bad you need one.

Sent from my Pixel 3 XL using Tapatalk

[Kinder]

Thanks for keeping an eye out for me, that price is actually good. VA would be tricky, but I do know a guy that hauls equipment from the east coast through Denver.

[Kinder]

Okay, letΓÇÖs try this again.

[Jesus_man]

Thumbs up!!!!

[Rox Crusher]

Now weΓÇÖre talking !

[Digger]

Back in business. Alright !

[Kinder]

The box grader at the park needed some repairs, BSD with the onboard welder to the rescue.

[Digger]

*two !*

That beast is a true workhorse.

[Rox Crusher]

Park team: stand back here comes Clint Eastwood / Chuck Norris / Macgyver again

[D&D72]

Park team: stand back here comes Clint Eastwood / Chuck Norris / Macgyver again

What about red/green?

[Kinder]

It had a good run, but the day has come, turbo rebuild time. IΓÇÖve always wondered what turbo was on my 4BT, itΓÇÖs a Holset HX30. Based on what IΓÇÖve read from others itΓÇÖs one of the better turbos for the 4BT, and itΓÇÖs performed well for me. IΓÇÖm going to attempt rebuilding it myself, kits arenΓÇÖt that expensive and the turbo is internally balanced. If I canΓÇÖt sort it IΓÇÖll look for a local shop before sending it out. I think I caught it before any damage was done, fingers crossed.

[Jesus_man]

Do they offer upgraded impellers?

[crawlercreations]

Turbo rebuilds are easy peasy. My first was the stock turbo on my 7.3 bus. Installed a wicked wheel 2 at the same time. Nothing to it.

[Kinder]

Do they offer upgraded impellers?

There isnΓÇÖt much out there for the HX30, most upgrades are oriented to the HX35 for the 6BTs. The HX30 can push 35 psi if given the fuel. My performance improvements live in the P Pump, I plan on upping my governor spring to 3k and swap in a new #10 fuel plate. ThatΓÇÖs about as far as I can go until I swap in heavier valve springs and fire ring / stud the block.

[Kinder]

Turbo rebuilds are easy peasy. My first was the stock turbo on my 7.3 bus. Installed a wicked wheel 2 at the same time. Nothing to it.

Thanks for the encouragement, I ordered the rebuild kit and watched a couple of vids & downloaded the service manual and spec sheet from Holset. I started the tear down last night. I just need to remove the exhaust housing, it doesnΓÇÖt want to come off easy, of course itΓÇÖs seen 1000 degrees hundreds of times, IΓÇÖll hit it a little harder tonight.

[Error404]

I would like to find an hx30 for mine. I have an hx35.. i have a wicked wheel in my tool box and stage 1 fuel pin and a stage 2 stashed for later.. lag is pretty bad. Currently get to 26lbs...but my head gasket finally gave up.

[Kinder]

From what IΓÇÖve read the HX30 is one of the best turbo matches for the 4BT, also the head gasket on the 4/6BTs is definitely a weak spot. The future hold pump upgrades for me, gov & fuel plate.

I would like to find an hx30 for mine. I have an hx35.. i have a wicked wheel in my tool box and stage 1 fuel pin and a stage 2 stashed for later.. lag is pretty bad. Currently get to 26lbs...but my head gasket finally gave up.

[Kinder]

BSD is back on the road, that took way too long. The rebuild kit was only available from one place online, I guess the HX30 isnΓÇÖt all that common. IΓÇÖll break it in easy then hammer it to make sure all is well. Pics tomorrow to prove it runs!

[Kinder]

A little late, proof that itΓÇÖs back in the wild.

[landshark]

A little late, proof that itΓÇÖs back in the wild.

That photo could have been taken at anytime... where is the newspaper with the current date???

[Jesus_man]

Either way, all I know is I am jealous of you getting out into the mtns! Was home for a few days last week and did some light wheeling with my Dad in his Rubi. It was great to be in paradise!!

[rt9]

A little late, proof that itΓÇÖs back in the wild.

Was at the car show in Elizabeth this weekend. A guy was there going on and on about this cool stretch bronco he saw in Parker. He was absolutely in love with it. Lol

Sent from my SM-N920P using Tapatalk

[Kinder]

Newspaper? How old are you, ha! IΓÇÖm in the park at the new trail that IΓÇÖve been working for forever. TodayΓÇÖs work is a bench install and buck & post/rail fencing.

[Digger]

Any updates?


How's she running? Do I need to tune up the 2.8 to hang with you?

[Error404]

Have you done headgaskets/studs in the 4bt yet?