BendPak 4 post lift

Tools For Sale and Trade
Post Reply
User avatar
ScottBarnes
Official CCB Member
Official CCB Member
Posts: 415
Joined: Fri Nov 25, 2011 6:34 am

BendPak 4 post lift

Post by ScottBarnes »

OK ΓÇö bought this about 18 months ago, and IΓÇÖm just not using it like I thought I would, so I want to free up room in the shop. Here are the specifics;

https://www.bendpak.com/car-lifts/four- ... ts/hd-9xl/

- BendPak HD 9XL 4 post lift
- Aluminum ramps, in addition to the steel ramps that come with it
- Drip Pans
- Bendpak 4,500 lb Rolling Bridge Jack (this is about a $1,200 upgrade that allows you to raise the wheels off the lift)
- Caster kit (so you can roll it around and donΓÇÖt have to mount it permanently)
- IΓÇÖll include a super long power extension cord that was custom made for me

If you have ceiling height, you can stack 2 cars in the footprint.

IΓÇÖve got about $5700 in it, including taxes. IΓÇÖll let it go for $2,500. ItΓÇÖs pretty much like new. You will need to move it yourself. I can give you the name of a local company who will pick it up, move it, and set it back up for you. Probably around $500 for that service.

IΓÇÖm posting here for a week or so before I put it on Craigslist.



Sent from my iPad using Tapatalk
Go Hard or Go Home
User avatar
landshark
Official CCB Member
Official CCB Member
Posts: 3942
Joined: Thu Oct 13, 2011 11:16 pm

Re: BendPak 4 post lift

Post by landshark »

ScottBarnes wrote:OK ΓÇö bought this about 18 months ago, and IΓÇÖm just not using it like I thought I would, so I want to free up room in the shop. Here are the specifics;

https://www.bendpak.com/car-lifts/four- ... ts/hd-9xl/

- BendPak HD 9XL 4 post lift
- Aluminum ramps, in addition to the steel ramps that come with it
- Drip Pans
- Bendpak 4,500 lb Rolling Bridge Jack (this is about a $1,200 upgrade that allows you to raise the wheels off the lift)
- Caster kit (so you can roll it around and donΓÇÖt have to mount it permanently)
- IΓÇÖll include a super long power extension cord that was custom made for me

If you have ceiling height, you can stack 2 cars in the footprint.

IΓÇÖve got about $5700 in it, including taxes. IΓÇÖll let it go for $2,500. ItΓÇÖs pretty much like new. You will need to move it yourself. I can give you the name of a local company who will pick it up, move it, and set it back up for you. Probably around $500 for that service.



IΓÇÖm posting here for a week or so before I put it on Craigslist.



Sent from my iPad using Tapatalk


Oh man....
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
Posts: 4077
Joined: Mon Jan 03, 2011 5:07 pm

Re: BendPak 4 post lift

Post by Gunnibronco »

Oh man is right. If I wasn't 16 hours away I'd be all over it.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
User avatar
Eck
Official CCB Member
Official CCB Member
Posts: 2462
Joined: Thu Oct 25, 2012 8:33 pm

Re: BendPak 4 post lift

Post by Eck »

Does that $500 service include raising my garage?! ThatΓÇÖs a heck of a deal for someone who can use it!


Sent from my iPhone using Tapatalk
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
User avatar
cpldavis37
Official CCB Member
Official CCB Member
Posts: 357
Joined: Sun Oct 16, 2011 6:45 pm

Re: BendPak 4 post lift

Post by cpldavis37 »

How much ceiling height does it require?
TJ
"Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known."
F. Scott Fitzgerald
1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear
User avatar
ScottBarnes
Official CCB Member
Official CCB Member
Posts: 415
Joined: Fri Nov 25, 2011 6:34 am

Re: BendPak 4 post lift

Post by ScottBarnes »

cpldavis37 wrote:How much ceiling height does it require?

It really depends on the height of your vehicle and how high you want to raise it. If your vehicle is 6 ft tall and you want to raise it another 6 ft on the lift, then youΓÇÖll need 12ΓÇÖ+ of ceiling height. Shorter car (like my sons El Camino) and lower lift height wouldnΓÇÖt take as much ceiling height. Make sense?
Go Hard or Go Home
User avatar
cpldavis37
Official CCB Member
Official CCB Member
Posts: 357
Joined: Sun Oct 16, 2011 6:45 pm

Re: BendPak 4 post lift

Post by cpldavis37 »

Makes sense.
TJ
"Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known."
F. Scott Fitzgerald
1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear
gabe1974
Official CCB Member
Official CCB Member
Posts: 8
Joined: Mon Aug 15, 2011 3:25 pm

Re: BendPak 4 post lift

Post by gabe1974 »

Please call me Im very interested in your lift?
970-231-6970
Post Reply