project viperwolfe is starting

Post by **landshark** » Sat Apr 04, 2015 10:26 pm

Nice job guys. Looking great.

Post by **Rox Crusher** » Sun Apr 05, 2015 10:51 am

I always seem to be the butt of all work party jokes

I don't understand, even though it always cracks me up

icon biggin

Post by **Gregg** » Sun Apr 05, 2015 6:13 pm

Viperwolf1 wrote:And this is where it finished. The Gaydos/Chaney/Warn Assembly Team worked there asses off. Jeff's pants were literally falling off at the end of the day. If you've ever spent some time in the garage with him you know what I mean.
!

Unfortunately, I do. I'm still in Jeff Crack withdrawl. Once you get a taste of it, you can't get enough.
:worthless:

Post by **777mechanic** » Sun Apr 05, 2015 7:27 pm

shawn there was so much crack going around on saturday that we finally filled it with a pepsi can , which later we ended up filling it with a six pack .

i'd like to give a very huge shout out to efiguru aka gary for doing the computer and harness , the workmanship is second to none

Post by **Moab Mike** » Sun Apr 05, 2015 7:38 pm

Nice work Garry!

Post by **EFI Guy** » Sun Apr 05, 2015 11:30 pm

Thanks!

I tried really hard to find pink zip ties for it, but the slightly faded red was the best I could do.

Post by **Viperwolf1** » Wed Apr 08, 2015 9:33 am

Made it this point in my 2 week work schedule. Frame is good to go. Drivetrain is installed. Rear brakes are installed. Fuel lines are done. Brake and trans cooler lines are almost done. And Shawn's PS box is working better than ever. Thanks for all the help Mike, Mike, Jeff and Shawn.

IMG_3444.JPG

IMG_3445.JPG

IMG_3446.JPG

Post by **TOOLMAN** » Wed Apr 08, 2015 9:49 am

Like...

Post by **Moab Mike** » Wed Apr 08, 2015 9:53 am

We'll be firing that thing up on your next visit! Safe travels.

Post by **mickphatmac** » Wed Apr 08, 2015 10:06 am

That rig is going to be Sooooo BadAss!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Love it!!!!!!!!!!!!
Nice job Boyz!

Post by **Woodscaper** » Wed Apr 08, 2015 6:14 pm

Awesome!

Post by **Viperwolf1** » Sun Apr 12, 2015 10:40 am

I rushed back to CA so I could make it to the Wild Horses Roundup. I've never seen so many Broncos at one time before. I sold the massive willwood rear disk brake kit. Oh, and I won a raffle prize. Two new Procar Elite seats.

Post by **Rox Crusher** » Sun Apr 12, 2015 10:52 am

Viperwolf1 wrote:I rushed back to CA so I could make it to the Wild Horses Roundup. I've never seen so many Broncos at one time before. I sold the massive willwood rear disk brake kit. Oh, and I won a raffle prize. Two new Procar Elite seats.

Now that was a grand slam !

Post by **Viperwolf1** » Sun Apr 12, 2015 11:04 am

It was pretty good. I was hoping to win either the adjustable track bar or the tuffy console. Didn't think I had a chance on the seats.

Post by **Kinder** » Sun Apr 12, 2015 12:22 pm

Do you need an adjustable track bar for your build?

Post by **Viperwolf1** » Sun Apr 12, 2015 12:52 pm

I might. Shawn brought me a stock bar that will work until I get a D44 in.

Post by **Kinder** » Sun Apr 12, 2015 1:34 pm

I'll set it aside, if it's needed it's yours.

Post by **landshark** » Sun Apr 12, 2015 6:28 pm

I might have a full set up. 1 ton. But not sure the lengths. Will check.

Post by **Viperwolf1** » Sun Apr 12, 2015 9:59 pm

landshark wrote:I might have a full set up. 1 ton. But not sure the lengths. Will check.

I have everything to build the 1 ton steering linkage.

Post by **landshark** » Sun Apr 12, 2015 10:28 pm

Ah you said trackbar. Misread

Post by **casadejohnson** » Tue Apr 14, 2015 10:58 pm

I have been away too long working on my new old house. This has come a long way since I last looked! Better be careful or its going to be too nice to wheel it.

Post by **Rox Crusher** » Thu Apr 16, 2015 7:34 pm

We all know that every good rig needs a name

I would like to suggest we name this one MC (short for something)

Post by **Viperwolf1** » Thu Apr 16, 2015 10:56 pm

You want to name it after Mike Chaney?

Post by **Moab Mike** » Fri Apr 17, 2015 5:01 am

I'll go with that!

Post by **landshark** » Fri Apr 17, 2015 6:58 am

Viperwolf1 wrote:You want to name it after Mike Chaney?

Wouldn't that be SOB?

[emoji2]

Post by **Moab Mike** » Fri Apr 17, 2015 9:21 am

Boy if I had any feelings they would be hurt!

Post by **Viperwolf1** » Sat Apr 18, 2015 7:54 pm

Any ideas what I'm doing now?

IMG_3504.JPG

IMG_3507.JPG

IMG_3509.JPG

Post by **ZOSO** » Sat Apr 18, 2015 8:04 pm

overdrive button.

Post by **Moab Mike** » Sat Apr 18, 2015 8:07 pm

So how are you getting the wires into the column?

Post by **Viperwolf1** » Sat Apr 18, 2015 8:12 pm

ZOSO wrote:overdrive button.

You got it. I was going to stop with just adding the aluminum manual shift knob but it was begging for more modification.

IMG_3503.JPG

IMG_3513.JPG

IMG_3515.JPG

www.ColoradoClassicBroncos.com

project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting

Re: project viperwolfe is starting