www.ColoradoClassicBroncos.com

Nice

That's real nice, Clark.

So, where are the promised pictures....?

Demanding audience! We still have a lot to do, including bolting the rocker guards back on to cover up the beat on rockers

Just curious- did you reshoot the whole thing? What was going on with it?


Sent from my iPhone using Tapatalk

LetΓÇÖs see the rear fender handiwork.

Greatness.

Eck wrote:Just curious- did you reshoot the whole thing? What was going on with it?

Kind of, fenders and hood were replaced & Willem wanted the orange stripe removed. He actually wanted to change the color, but I wasnΓÇÖt willing to front the $, heΓÇÖs saving up.

landshark wrote:LetΓÇÖs see the rear fender handiwork.

Ha, youΓÇÖve noticed my cropping of photos! We want to get a few more updates done and then weΓÇÖll do a complete reveal.

Enjoy Willem! Thank you both for Your patients....and not dying on you!!
Still a bit to do, but Boulder be ware!!

Kinder wrote:

Eck wrote:Just curious- did you reshoot the whole thing? What was going on with it?

Kind of, fenders and hood were replaced & Willem wanted the orange stripe removed. He actually wanted to change the color, but I wasnΓÇÖt willing to front the $, heΓÇÖs saving up.

They gave me ample time ....so we reshot the whole exterior, plus with a couple of changes....the whole thing needed shot

Big O looks real nice! W is going to have a lot of fun scooting around the People's Republic.

Declan made this console cover for WillemΓÇÖs bronco, it turned out great.

Kinder wrote:Declan made this console cover for WillemΓÇÖs bronco, it turned out great.

That's awesome. If he makes another I'll buy it.

Justin wrote:That's awesome. If he makes another I'll buy it.

IΓÇÖll let him know.

Started the ZF swap on TFB, yanked the auto setup out yesterday and started prepping the Bronco for the 3rd pedal. Found a couple of needed bits at the JY today, bolted the ZF adapter onto the D20 and unwrapped the rebuilt ZF. Time to sort out the ill fitting exhaust & fix that leaking oil pan gasket! New parts are so shiny.

Do you still need a brake pedal? I think I have one.

Justin wrote:Do you still need a brake pedal? I think I have one.

I do, let me know if you find it.

Free to a good home.

Excellent! Can you set it outside and IΓÇÖll work on a time to swing by.

How do you start an engine w/out a trans bolted up so you can chase down the oil leak coming from the back of the motor? Well, you dig out an old bell housing that you just canΓÇÖt throw away and bolt up the flex plate and starter and turn the key. Happy to report it isnΓÇÖt the rear main seal, it was just the oil pan gasket failing again

LOL - that falls under the "You never know when you might need it" category. And so it perpetuates!

Happy to report the ZF-5 has been shoehorned in, 1ΓÇ¥ body lift for the win!

Poke -> Rox

With a 1" lift that's impressive! Nice job

Back on the road today for a quick around the block run. The clutch master barely slipped in between the all other junk bolted to the firewall and inner fender. WeΓÇÖve temporarily mounted the original shifter to the trans with a small adapter plate, he has plans for something better.

We have a few items to tidy up; clearance the x-member for the front driveshaft, swap hubs over to Warn, improve the new sheet metal for the trans tunnel, install the new twin sticks, etc.

Willem is one step closer to having the Bronco that he always wanted. Welcome to the 3 pedal world my boy!

That's great!! Welcome! Manual tranny's FTW!! LOL!

WillemΓÇÖs stock Explorer PS pump was starting to fail & I never really like the Explorer reservoir either.

Upgraded to the Viper built PS pump & PSC res w/ 12AN sized supply line, because Justin canΓÇÖt be the only guy with a big hose, ha!

Good upgrade! I have 1 more of the brackets to attach the reservoir to the explorer bracket if youΓÇÖre interested.




Sent from my iPhone using Tapatalk

How do you like the psc reservoir?

Eck wrote:Good upgrade! I have 1 more of the brackets to attach the reservoir to the explorer bracket if youΓÇÖre interested.

Yes please, IΓÇÖll need to look at it closely as WillemΓÇÖs fiberglass hood has a large support that occupies the space for the factory location.