www.ColoradoClassicBroncos.com

D&D72 wrote:Dat sumanabastich sounds fargin sweet!

thanks

still need to fix a leak at the collector on the passenger side and add a CAT so it will probably change a bit

lol, nice.

That very evil thing happened today

Does evil = body lift?

BroncoRaider wrote:Does evil = body lift?

You guessed er', Chester

But it appears the new hood now fits

Gonna try the stock hood today just for giggles

How's your engine coming together ?

THIS JUST IN

Turns out that a 1" body lift, combined with a heavy duty fender washer, allows me to use the stock hood after all.

I need to tweak a few little things under the hood to help the throttle position sensor clear but that ain't nuttin budda thang at this point.

Thank you evil body lift !

Rox Crusher wrote:THIS JUST IN

Turns out that a 1" body lift, combined with a heavy duty fender washer, allows me to use the stock hood after all.

I need to tweak a few little things under the hood to help the throttle position sensor clear but that ain't nuttin budda thang at this point.

Thank you evil body lift !

image.jpeg

that body gap near the bumper looks awful! :)

Congrats! looking good

Like. The next question is when are we putting that cage in?

landshark wrote:
that body gap near the bumper looks awful! :)

Congrats! looking good

Thank you, I am excited about being able to keep the stock hood.

so, wrt that gap..........................do you know any good auto body guys that could make a piece that fills that gap in ?

calling Gunnibronco and / or JGZ !

Looks good!

It wouldn't be hard to do. I'll look at my grill tonight and try to figure something out. I only have 16g metal right now, sort of tough to work with. I need to get my hands on some 18g, just hate to pay Gunnison prices.

Rox Crusher wrote:

landshark wrote:
that body gap near the bumper looks awful! :)

Congrats! looking good

Thank you, I am excited about being able to keep the stock hood.

so, wrt that gap..........................do you know any good auto body guys that could make a piece that fills that gap in ?

calling Gunnibronco and / or JGZ !

LOL!!!
That's exactly why I don't want a Body Lift!!!

I do like the idea of a lower front grill roll pan.

You might just have to run the plow year round and then you'll never see it!
The stock hood is definitely where it's at

Bitchin......

[quote="mickphatmac"] You might just have to run the plow year round and then you'll never see it!
[\quote]

That plow now belongs to the F1 Fiddy

Rox Crusher wrote:That plow now belongs to the F1 Fiddy

Well we might have to think of new names like "Gappy", "Win one for the Gapper"...or maybe just.... "Michael Strayhan"

Nice work Jeff!

Rox Crusher wrote:

landshark wrote:
that body gap near the bumper looks awful! :)

Congrats! looking good

Thank you, I am excited about being able to keep the stock hood.

so, wrt that gap..........................do you know any good auto body guys that could make a piece that fills that gap in ?

calling Gunnibronco and / or JGZ !

How about a winch bumper and winch. That'll fix it up just right.

A wise man told me I should go ahead and pre-clearance my oil pan

So the body lift is on, the shifter linkage has been extended, the fan shroud has been removed for a little bit of re-work, and the floor has been trimmed to allow the twin sticks to function.

Started it up and it was making a helluva racket. Sounded like it was coming from bell housing area so quickly shut it down. Sounded like the flex plate or torque converter nuts were hitting the block plate.

Thought I might have messed something up with the shifter linkage or transfer case which I forgot to double check before starting it.

On top of this, it has been leaking oil pretty good at the pan - front and rear. We thought it was leaking up front and running along the flange of the pan and then down the back of the pan and block plate.

Thought it might be a bad stroke of luck and maybe the rear main seal had popped out somehow and was getting chewed up and making that awful noise.

I tried starting it several times in gear, neutral, transfer case in neutral and the noise remained. Took the trans inspection plate off and everything up there looked awesome. The noise was rotational but the crossover tube had been touching the inspection cover so I took it off. Still the noise remained. Really loud and perplexing. Was starting to think something had gone "Eck-ish" in the motor.

I stood at the front of the Bronco, placed my head on the radiator, arms draped into engine bay grasping at straws / ideas. My hands fell on the fan and I gave it a spin and it was hitting / hanging up on the lower radiator hose as the shroud was no longer there to keep it away.

Zip tied the hose and started it up and noise was no longer there.

They say it can be better to be lucky, than good.

I'm a believer !

Glad it turned out to be non "Eck-ish". Noises make people !! https://static-secure.guim.co.uk/sys-im ... ng-008.jpg

Is the '77 going to make an appearance in Aurora on Saturday?

BroncoRaider wrote:Is the '77 going to make an appearance in Aurora on Saturday?

Yes, the 77 F150 will be there

whats going on in Aurora?

landshark wrote:whats going on in Aurora?

we are going to install motor and tranny in buddy tomorrow

bring it !

What time need address

Well, I put a good 50 miles on it this evening.

Love the motor !

Never got over 193. Oil pressure of 47 while running, 19 at idle.

Fuel pressure 62 PSI while riding, drops to 55 at WOT.

Got a check engine light when I fired it back up after checking oil level and it is still leaking at rear of pan.

More opportunities to tinker I guess.

Awesome, can't wait to see it.

Drove it up 470 in the afternoon heat yesterday (85) and it got as hot as 221.

I guess I better get my fan shroud figured out soon.

Ordered the Vintage Air Gen IV today !

Figured I might as well put it in before installing roll cage and carpet.

Sweet! That'll be a nice addition!