www.ColoradoClassicBroncos.com

Posted: **Sun Dec 04, 2016 5:12 pm**

That club plate is cool !

Posted: **Sun Dec 04, 2016 6:38 pm**

And still around I believe!

Posted: **Sat Dec 31, 2016 6:38 pm**

This thing has been leaking oil at rear main and sucking oil into cylinders.

plugs are oily, and oil getting into almost all intake runners, especially # 8 and # 4.

So Phil made a nice baffle for the underside of the intake to try to get it under control.

Replaced rear main too.

Posted: **Sat Dec 31, 2016 6:41 pm**

Rox Crusher wrote:This thing has been leaking oil at rear main and sucking oil into cylinders.

plugs are oily, and oil getting into almost all intake runners, especially # 8 and # 4.

So Phil made a nice baffle for the underside of the intake to try to get it under control.

Replaced rear main too.

How hard was it to replace the rear main seal ?
Did you have to lift the engine up ?

Posted: **Sat Dec 31, 2016 9:21 pm**

cravenbronco wrote:
Rox Crusher wrote:This thing has been leaking oil at rear main and sucking oil into cylinders.

plugs are oily, and oil getting into almost all intake runners, especially # 8 and # 4.

So Phil made a nice baffle for the underside of the intake to try to get it under control.

Replaced rear main too.

How hard was it to replace the rear main seal ?
Did you have to lift the engine up ?

Yes, up and over the core support and grill.

: )

Posted: **Mon Jan 02, 2017 9:45 pm**

Put in new (to me) seats. Since I knew the Bronco would be down for a bit, I took the opportunity to freshen up the seats without disrupting my daddy/pickup duties. When I got the truck, it had no back seat and Dodge Durango front seats. The 6-way power seat was nice...but the seats were just not my style. And I bought a used back off of CL and it was just good enough to put the kids' seats in it. I got OEM fronts from a guy who, in addition to a classic Bronco, had a couple Porsches and an NSX (are you on here?). I bought the pearl white covers and white armrests from Tom's and handed it all over to my upholstery guy at work. And I had some white door panels that came with the truck...

Before and after rear:

Before and after of the OEM fronts:

Tried to get a side-by-side with the Durango fronts:

The door panels that came with the truck:

Then I'll call this the "finished" product....but there'll be more to come:

Posted: **Tue Jan 03, 2017 10:20 am**

Looks great!!

Posted: **Thu Jan 05, 2017 6:20 pm**

Started shoveling it out.

Posted: **Thu Jan 05, 2017 6:31 pm**

Dang! And we were happy with our 1" we got here in IL!

Posted: **Thu Jan 05, 2017 6:40 pm**

The last 48 hours has been one of the biggest storms I've seen in 22 years in Gunnison. Probably 2.5'. Another similar storm is forecast for early next week too.

Posted: **Tue Jan 17, 2017 6:14 pm**

Interior looks great Jon!

Sent from my iPhone using Tapatalk

Posted: **Fri Feb 17, 2017 11:25 am**

Breaker 14, Breaker 14.........happy birthday to me !

IMG_1655.JPG

Posted: **Fri Feb 17, 2017 7:26 pm**

Working on replacing the power steering pump, steering box and adding hydroboost.

Posted: **Sat Feb 18, 2017 7:05 pm**

Wheel bearings. I let eldest do everything. I held the beer. [emoji2]

Sent from my SM-G860P using Tapatalk

Posted: **Mon Feb 20, 2017 8:56 am**

Installed a new WH battery tray after the breakfast Saturday!

Posted: **Mon Feb 20, 2017 9:21 am**

Realized I posted the wrong progress photo of my hydro swap! waiting on some hose ends and need to pick up the master cylinder..

IMG_2227.JPG

Working on adding a transmission cooler as well..

Posted: **Mon Feb 27, 2017 2:50 pm**

Started putting the cage together last weekend....

Posted: **Mon Feb 27, 2017 3:36 pm**

Daaaanng, nice welding table

Posted: **Mon Feb 27, 2017 4:19 pm**

Digger wrote:Daaaanng, nice welding table

I noticed the Sanford and Son digs too

Posted: **Mon Feb 27, 2017 9:02 pm**

TOOLMAN wrote:Started putting the cage together last weekend....

What are your plans for rockers? Cutting them and going sliders? I'm going to wind up chopping TO's rockers and replacing with new metal. I could bring the old ones west in May when I come out for fire training...

Posted: **Tue Feb 28, 2017 7:18 am**

Digger wrote:Daaaanng, nice welding table

It is pretty sweet. Along with all the holes, there's a grid etched into the table top. The guy who's helping me said it's German made and probably the best purchase he's made for the shop (that includes the 4 CNC machines he has).

Posted: **Tue Feb 28, 2017 7:22 am**

akaFrankCastle wrote:
TOOLMAN wrote:Started putting the cage together last weekend....

What are your plans for rockers? Cutting them and going sliders? I'm going to wind up chopping TO's rockers and replacing with new metal. I could bring the old ones west in May when I come out for fire training...

I'll eventually cut them and put on sliders. But I figured I'd wait and do that with the other tub I have. I'm not sure when that is going to happen, so if you brought your old rockers out, I could probably make use of at least one of them! I would like to repair that side so I can put doors back on, but I think the post is jacked as well. It may be able to be 'adjusted.'

Posted: **Sat Mar 25, 2017 8:55 pm**

Test fit a few new parts.

IMG_3338.jpg

Posted: **Sun Mar 26, 2017 3:23 am**

Viperwolf1 wrote:Test fit a few new parts.
IMG_3338.jpg

That's gonna look great !

Posted: **Sun Mar 26, 2017 4:17 am**

Got the new seat belts installed.

Posted: **Mon Mar 27, 2017 5:19 am**

Viperwolf1 wrote:Test fit a few new parts.
IMG_3338.jpg

Riiiiiiight.....

Posted: **Mon Mar 27, 2017 10:55 am**

Viperwolf1 wrote:Test fit a few new parts.
IMG_3338.jpg

Sell that bronco before you cut it.

Posted: **Mon Mar 27, 2017 11:01 am**

Jesus_man wrote:
Viperwolf1 wrote:Test fit a few new parts.
IMG_3338.jpg

Riiiiiiight.....

Give him a bit more credit.........he knows he has to do the right and the left.

Posted: **Mon Mar 27, 2017 12:45 pm**

Do we need to send the CCB intervention team out?

Posted: **Mon Mar 27, 2017 7:52 pm**

Pneumatic sheers cut that sheet metal like butter.... won't even scuff the paint.

Can't cut the back and not the front. Go big or go home!

Sent from my iPhone using Tapatalk

www.ColoradoClassicBroncos.com

What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

Re: What have you done to your Bronco today? (v.2)

What have you done to your Bronco today? (v.2)