Re: What have you done to your Bronco today? (v.2)
Posted: Mon Oct 29, 2018 11:43 am
Nice looking tires Mike!
I really like the way those steely rims look.
I really like the way those steely rims look.
www.ColoradoClassicBroncos.com
A place for Coloradans to unite with our love of 66-77 Ford Broncos
https://www.coloradoclassicbroncos.com/
What have you done to your Bronco today? (v.2)
Page 83 of 89
Re: What have you done to your Bronco today? (v.2)
Posted: Mon Oct 29, 2018 1:45 pm
I looked everywhere but no matter how hard I tried, I couldnΓÇÖt find blue letter tires....lucky dog.
Re: What have you done to your Bronco today? (v.2)
Posted: Mon Oct 29, 2018 2:24 pm
BroncoRaider wrote:I looked everywhere but no matter how hard I tried, I couldnΓÇÖt find blue letter tires....lucky dog.
LOL!!!!
Special order from what I gathered on my Marti Report...Harbor Blue
Re: What have you done to your Bronco today? (v.2)
Posted: Sun Nov 25, 2018 12:10 am
Re-fitted / tightened up the fuel tank which was knocked loose by rocks during last wheeling trip.
Got a pretty heavy leak from pinion seal on rear end so gonna have to tackle that real soon
Got a pretty heavy leak from pinion seal on rear end so gonna have to tackle that real soon
Re: What have you done to your Bronco today? (v.2)
Posted: Mon Dec 03, 2018 8:46 am
Rox Crusher wrote:Re-fitted / tightened up the fuel tank which was knocked loose by rocks during last wheeling trip.
Got a pretty heavy leak from pinion seal on rear end so gonna have to tackle that real soon
Check the crush sleeve if you still have one. Any pinion movement will eat seals.
Re: What have you done to your Bronco today? (v.2)
Posted: Mon Dec 03, 2018 2:44 pm
Digger wrote:Check the crush sleeve if you still have one. Any pinion movement will eat seals.
I should have done the crush sleeve before going to Baja but crossed my fingers instead...........
Re: What have you done to your Bronco today? (v.2)
Posted: Mon Dec 03, 2018 6:44 pm
Rox Crusher wrote:Digger wrote:Check the crush sleeve if you still have one. Any pinion movement will eat seals.
I should have done the crush sleeve before going to Baja but crossed my fingers instead...........
Well Im only speaking from (bad) experience of squishing the crush sleeve so bad I had to pull the rear driveshaft and tow the camper 150 miles home on the front axle.
I will only build 9's with crush sleeve eliminators from now on.
Re: What have you done to your Bronco today? (v.2)
Posted: Tue Dec 11, 2018 6:57 pm
( In a Steve Urkel voice ) did I do that !!!??? ;)
Re: What have you done to your Bronco today? (v.2)
Posted: Wed Dec 12, 2018 10:58 am
Helllloooiooo Bronco Hut...
Re: What have you done to your Bronco today? (v.2)
Posted: Sat Dec 15, 2018 9:16 pm
2nd run and now theyΓÇÖre done.
Re: What have you done to your Bronco today? (v.2)
Posted: Thu Feb 14, 2019 6:42 am
We decided to rebel...
Sent from my iPhone using Tapatalk
Re: What have you done to your Bronco today? (v.2)
Posted: Thu Feb 14, 2019 6:53 am
Fuel efficient is a relative term I guess.
Re: What have you done to your Bronco today? (v.2)
Posted: Thu Feb 14, 2019 8:56 am
Eck wrote:
We decided to rebel...
Sent from my iPhone using Tapatalk
Fight the man!
Technically you're more fuel efficient than a stock Bronco...
Re: What have you done to your Bronco today? (v.2)
Posted: Fri Feb 15, 2019 6:19 am
been doing a lot lately. Had the engine out and tore down to find the issue with cylinder #3 low compression. Re assembled and installed. Swapped out my old duff headers for new ones to clear the duff long arms. Started the install of those and am still in the process of cutting the larsbars brackets off the frame. Hope to have that finished sunday so I can start to build my exhaust to clear everything.
Re: What have you done to your Bronco today? (v.2)
Posted: Fri Feb 15, 2019 8:07 am
Solid work Rob! Hope yo get that beast reliable again!
Me...not nearly as much. Tore down a beadlock and replaced a valve stem that had a slow leak. After KOH and getting reports of my folks' wheeling trips near Lake Havasu, really have the itch to go wheeling again!
Me...not nearly as much. Tore down a beadlock and replaced a valve stem that had a slow leak. After KOH and getting reports of my folks' wheeling trips near Lake Havasu, really have the itch to go wheeling again!
Re: What have you done to your Bronco today? (v.2)
Posted: Sat Feb 16, 2019 2:27 pm
Duffs installed. Now to find some longer travel shocks.....
Re: What have you done to your Bronco today? (v.2)
Posted: Mon Feb 25, 2019 9:46 am
Waiting on new u-joints. Old ones are garbage.
...and then thereΓÇÖs the Disc Brake conversion :)
...and then thereΓÇÖs the Disc Brake conversion :)
Re: What have you done to your Bronco today? (v.2)
Posted: Mon Feb 25, 2019 10:20 am
Finally finished the power steering conversion. All I can say is WOW!
Sent from my SM-N920P using Tapatalk
Sent from my SM-N920P using Tapatalk
Re: What have you done to your Bronco today? (v.2)
Posted: Mon Feb 25, 2019 10:33 am
Glad someone is doing some work! Good job fellas! I haven't even started mine in...well....a couple months!
Re: What have you done to your Bronco today? (v.2)
Posted: Mon Feb 25, 2019 3:17 pm
rt9 wrote:Finally finished the power steering conversion. All I can say is WOW!
Sent from my SM-N920P using Tapatalk
Is that the Delphi box?
Re: What have you done to your Bronco today? (v.2)
Posted: Mon Feb 25, 2019 3:19 pm
Yep. Overall was not very hard at all. Just getting time to work on it.
Sent from my SM-N920P using Tapatalk
Sent from my SM-N920P using Tapatalk
Re: What have you done to your Bronco today? (v.2)
Posted: Thu Feb 28, 2019 7:22 pm
Fired it up again today. This go around was to find the low compression in cyl 3 and advance the cam. Put new headers on it and built my own exhaust. Will get the exhaust finished up tomorrow and start in on the wiring.
Re: What have you done to your Bronco today? (v.2)
Posted: Thu Feb 28, 2019 8:30 pm
[emoji106]
Re: What have you done to your Bronco today? (v.2)
Posted: Fri Mar 01, 2019 1:30 pm
ΓÇ£1stΓÇ¥ I had A problem with this...
ΓÇ£ThenΓÇ¥ I bought this...
ΓÇ£NextΓÇ¥ I finished that...
ΓÇ£*ΓÇ¥ much MO Betta!!!
ΓÇ£ThenΓÇ¥ I bought this...
ΓÇ£NextΓÇ¥ I finished that...
ΓÇ£*ΓÇ¥ much MO Betta!!!
Re: What have you done to your Bronco today? (v.2)
Posted: Fri Mar 01, 2019 7:02 pm
mickphatmac wrote:ΓÇ£1stΓÇ¥ I had A problem with this...
ΓÇ£ThenΓÇ¥ I bought this...
ΓÇ£NextΓÇ¥ I finished that...
ΓÇ£*ΓÇ¥ much MO Betta!!!
Very nicely done, having a press make things much easier
Re: What have you done to your Bronco today? (v.2)
Posted: Fri Mar 01, 2019 11:03 pm
Re: What have you done to your Bronco today? (v.2)
Posted: Sat Mar 02, 2019 7:48 pm
Exhaust is complete. Hope to tie up the rest of the engine stuff tomorrow.
Re: What have you done to your Bronco today? (v.2)
Posted: Sat Mar 02, 2019 10:00 pm
That's looking good.
Re: What have you done to your Bronco today? (v.2)
Posted: Tue Mar 05, 2019 5:46 pm
Well I will say damn this thing runs like it should now. Gonna drive it the next few days.
Re: What have you done to your Bronco today? (v.2)
Posted: Tue Mar 05, 2019 7:14 pm
ZOSO wrote:Well I will say damn this thing runs like it should now. Gonna drive it the next few days.
I'll bet that feels good!!