Page 86 of 89
Re: What have you done to your Bronco today? (v.2)
Posted: Sun Sep 01, 2019 10:02 pm
by Eck
Looks good Adam. CanΓÇÖt wait to see it!!
Sent from my iPhone using Tapatalk
Re: What have you done to your Bronco today? (v.2)
Posted: Sun Sep 01, 2019 10:18 pm
by Justin
Nice job!
Re: What have you done to your Bronco today? (v.2)
Posted: Sat Sep 14, 2019 4:47 pm
by phyler
Couldn't bring myself to pay $10 plus shipping for another one of these brackets. Realized it was just 16ga sheet metal. Happened to have a piece sitting in the scrap pile so I made one.
Front fender is now better attached than it has been in 20 years.

Sent from my Pixel 2 using Tapatalk
Re: What have you done to your Bronco today? (v.2)
Posted: Thu Sep 26, 2019 7:02 pm
by phyler
Running against time. Trying to get epoxy sprayed before temps drop. Hoping to get the door and fender off tonight still.

Sent from my Pixel 2 using Tapatalk
Re: What have you done to your Bronco today? (v.2)
Posted: Mon Sep 30, 2019 7:42 pm
by phyler
Re: What have you done to your Bronco today? (v.2)
Posted: Mon Sep 30, 2019 8:04 pm
by Eck
Quite the milestone. Congrats!
Sent from my iPhone using Tapatalk
Re: What have you done to your Bronco today? (v.2)
Posted: Mon Sep 30, 2019 8:23 pm
by Justin
Looks great!
Re: What have you done to your Bronco today? (v.2)
Posted: Mon Sep 30, 2019 8:41 pm
by phyler
Got the masking off. Super happy with it. For never having painted a vehicle before this, I'm extremely happy. Huge shout out to Gunni and Strike2 for their advice. I don't think the body would have come out near as nice with out their input.

Sent from my Pixel 2 using Tapatalk
Re: What have you done to your Bronco today? (v.2)
Posted: Mon Sep 30, 2019 9:48 pm
by Gunnibronco
Nice work!
Re: What have you done to your Bronco today? (v.2)
Posted: Tue Oct 01, 2019 2:46 am
by BOBS 2 68S
Looks GREAT!!
Love that color .
Re: What have you done to your Bronco today? (v.2)
Posted: Tue Oct 01, 2019 6:07 am
by TOOLMAN
Re: What have you done to your Bronco today? (v.2)
Posted: Tue Oct 01, 2019 7:08 am
by Strike2
Nice Job Adam Looks Great! cant wait to see it on the rode.
Re: What have you done to your Bronco today? (v.2)
Posted: Sat Oct 19, 2019 5:09 pm
by phyler
I drove it! Might have only been the half mile to the gas station and then to the ice cream store a few doors down but I drove it.
Also found that the rubber fuel line from the tank to the hard line had rotted. Fixed that but not after leaking a bunch on the ground. Oh well, still, I drove it. [emoji1]

Sent from my Pixel 2 using Tapatalk
Re: What have you done to your Bronco today? (v.2)
Posted: Sat Oct 19, 2019 5:11 pm
by Justin
Sweet!
Re: What have you done to your Bronco today? (v.2)
Posted: Sat Oct 19, 2019 7:13 pm
by Digger
That's exciting!
Nice work!
Re: What have you done to your Bronco today? (v.2)
Posted: Sun Oct 20, 2019 4:57 pm
by mickphatmac
Whoot Whoooot!!!!
Yeaaaah Buuuddy!!!
Re: What have you done to your Bronco today? (v.2)
Posted: Sun Oct 20, 2019 9:26 pm
by D&D72
Awesome!

Re: What have you done to your Bronco today? (v.2)
Posted: Mon Oct 21, 2019 5:18 am
by Strike2
Well Done Adam!!
Re: What have you done to your Bronco today? (v.2)
Posted: Thu Oct 24, 2019 7:41 am
by ZOSO
Sometimes you gotta put em to work.
Re: What have you done to your Bronco today? (v.2)
Posted: Thu Oct 24, 2019 7:50 am
by Jesus_man
That looks like Elk veal??? Tasty either way and this goes under the "work smarter" category!
Re: What have you done to your Bronco today? (v.2)
Posted: Thu Oct 24, 2019 1:09 pm
by ZOSO
Jesus_man wrote:That looks like Elk veal??? Tasty either way and this goes under the "work smarter" category!
Pretty close. Is a yearling calf. She'll be good eating. Bigger than the elk we got last year.
Oh and I shot it with an AR10. My normal 270 is messed up so I only had my ar to hunt with.
Re: What have you done to your Bronco today? (v.2)
Posted: Thu Oct 24, 2019 6:26 pm
by Digger
ZOSO wrote:Jesus_man wrote:That looks like Elk veal??? Tasty either way and this goes under the "work smarter" category!
Pretty close. Is a yearling calf. She'll be good eating. Bigger than the elk we got last year.
Oh and I shot it with an AR10. My normal 270 is messed up so I only had my ar to hunt with.
Nice

Re: What have you done to your Bronco today? (v.2)
Posted: Sun Dec 15, 2019 11:08 am
by Rox Crusher
Yesterday I brought it by GarryΓÇÖs and he replaced the relay and fuse box on the harness.
It seems your supposed to mount that sucker so it doesnΓÇÖt fill up with water ?
Thanks again EFI Guy !
Re: What have you done to your Bronco today? (v.2)
Posted: Sun Dec 15, 2019 3:52 pm
by ZOSO
spent the day starting to install the new steering. That required new knuckles/ball joints. then cutting the drop trac bar bracket off. installing new duffs bracket, installing riser on the axle. only thing left is to remove the drop pitman arm and install everything and make all the adjustments.
Re: What have you done to your Bronco today? (v.2)
Posted: Sun Feb 23, 2020 2:07 pm
by Rox Crusher
Installed a new power steering reservoir to overcome flow problems with previous set up.
2F2F29DF-78D3-4830-B716-2FD72A4F537D.jpeg
686331FC-614E-435A-88ED-A23ABF063765.jpeg
Re: What have you done to your Bronco today? (v.2)
Posted: Sun Feb 23, 2020 2:11 pm
by Rox Crusher
Rox Crusher wrote:Yesterday I brought it by GarryΓÇÖs and he replaced the relay and fuse box on the harness.
It seems your supposed to mount that sucker so it doesnΓÇÖt fill up with water ?
Thanks again EFI Guy !
Seems like this was only part of the fuel supply problem. I was having intermittent fuel pressure problems which left me stranded on shoulder of the road several times.
Last week it happened again, just wouldnΓÇÖt hold pressure so I replaced the adjustable fuel pressure regulator and all working fine (for now?).
Re: What have you done to your Bronco today? (v.2)
Posted: Sun Feb 23, 2020 3:07 pm
by Justin
That reservoir looks great! Where'd you get it? Glad your fuel issues might be sorted.
Sent from my SM-G975U using Tapatalk
Re: What have you done to your Bronco today? (v.2)
Posted: Sun Feb 23, 2020 6:16 pm
by Rox Crusher
Justin wrote:That reservoir looks great! Where'd you get it? Glad your fuel issues might be sorted.
Sent from my SM-G975U using Tapatalk
The reservoir is from a side job guy named Jaime in California.
I can provide his contact info to anybody that wants it.
The craftsmanship is very nice and he did a great job with the internal baffling to control flow / minimize aeration from return fluid.
Re: What have you done to your Bronco today? (v.2)
Posted: Sun Feb 23, 2020 6:42 pm
by Justin
I'd be interested.
Sent from my SM-G975U using Tapatalk
Re: What have you done to your Bronco today? (v.2)
Posted: Sun Feb 23, 2020 8:11 pm
by Strike2
[quote="Rox Crusher"]Installed a new power steering reservoir to overcome flow problems with previous set up.
That sure is a sweet looking reservoir!