www.ColoradoClassicBroncos.com

Posted: **Sat Jun 18, 2011 7:55 pm**

It does look nice! Good find.

Posted: **Sun Jun 19, 2011 2:06 pm**

Well I finished off the last of the passenger side today. Borrowed the brake from Dan and bent up the patch. Came out pretty good. Only thing left is to drill the holes for the seat and body bolts.

Posted: **Sun Jun 19, 2011 3:27 pm**

Looks good man - keep up this schedule you will be back on the road in no time.

Posted: **Sun Jun 19, 2011 4:25 pm**

Rob, were you able to get it registered or is that still in the process?

Posted: **Sun Jun 19, 2011 7:08 pm**

76fordbronco wrote:Rob, were you able to get it registered or is that still in the process?

Still on-going. I'll get it figured out sooner than later.

Posted: **Sun Jun 19, 2011 7:41 pm**

ZOSO wrote:
76fordbronco wrote:Rob, were you able to get it registered or is that still in the process?

Still on-going. I'll get it figured out sooner than later.

Glad to hear its in the process. It looks like the repairs are coming along nicely, I'm always glad to see another one being saved. Let me know if I can help in any way.

BTW, congratulations on your upgrade to Moderator status too!

Posted: **Mon Jun 27, 2011 11:28 am**

zillacon wrote:WTF Dude! Is it done yet???????? Ouray is coming fast!

Bring me a yellow donor for running gear and ill have it in ouray. You ready for me to bring to ya for paint?

Posted: **Wed Oct 12, 2011 7:16 am**

Sure. Come push me around and ill steer and even make engine noises.

Posted: **Sat Oct 15, 2011 5:56 pm**

Did a little quick work to the bronco today. Made a patch to fill in the aux gas tank filler.

also found a dent that was filled in with bondo. Wont be much left of it cause the corners are getting cut off.

Posted: **Mon Oct 17, 2011 5:28 am**

I did a drive by yesterday to check it out but, looked like everything was in hiding..... maybe you were out back cookin

Posted: **Mon Oct 17, 2011 5:31 am**

That's cause its at my dads house. No room here unless I move my car out. Not sure I want mt Cobra sitting out.

Posted: **Mon Oct 17, 2011 5:34 am**

We my have to try it on the driver door. Where the mirror goes there is a dent.

Posted: **Mon Oct 17, 2011 5:38 am**

ZOSO wrote:That's cause its at my dads house. No room here unless I move my car out. Not sure I want mt Cobra sitting out.

Yeah, don't want any honey badgers lurking around that cobra!

Posted: **Mon Oct 17, 2011 8:05 am**

K. It'll be 2 weeks or so.

Posted: **Wed Oct 26, 2011 6:13 pm**

Ok so I have to decide. This green...http://classicbroncos.com/forums/showth ... p?t=194220

or rescue green. Im thinking more towards the factory green in the link. Now to decide with either silver accents or black. I saw a bronco on tuesday that was dark blue that had a silver top and flairs. I really liked the silver accents.

Posted: **Thu Oct 27, 2011 11:40 pm**

I like the rescue green better. looks good with black.

Posted: **Thu Dec 22, 2011 8:16 pm**

I love the cowl scoops! did you keep them on?
nice work

Posted: **Fri Dec 23, 2011 6:05 am**

Zillacon took the cowl scoops before I bought it from him.

Posted: **Tue Jan 10, 2012 10:15 am**

Saw a cool Green on cb.com yesterday. Love the white rally stripe.

Posted: **Tue Jan 10, 2012 5:48 pm**

That is a nice touch, I may have to borrow that for mine!

Posted: **Tue Jan 10, 2012 5:53 pm**

I saw those pics. i've always been a fan of the dark highland green. But on an EB it needs to be bright.

Posted: **Tue Jan 10, 2012 7:19 pm**

ZOSO wrote:I saw those pics. i've always been a fan of the dark highland green. But on an EB it needs to be bright.

I disagree. That happens to be my absolute favorite color. Ad a brown interior and you have pretty much nailed it!

Posted: **Wed Jun 20, 2012 6:30 pm**

Bringing this back up. I need to get my camera out since my phone is dead but I made the first cuts on the exterior. I cut off about 4 inches of the rear quarter panel and tail light panel. This is for a good cause. I'm donating the clean rust free corners to landsharks build. I'll get pics up soon.

Posted: **Thu Jun 21, 2012 8:38 pm**

Thanks dude I will find out tomorrow if they will work but at least one side will!

Posted: **Fri Jun 22, 2012 1:32 pm**

hockeydad4-22 wrote:
ZOSO wrote:I saw those pics. i've always been a fan of the dark highland green. But on an EB it needs to be bright.

I disagree. That happens to be my absolute favorite color. Ad a brown interior and you have pretty much nailed it!

X2 with hockeydad! maybe we'll see a stretched EB with that color combo?

Posted: **Sat Jul 14, 2012 6:21 pm**

Ok I have been to work on the 74 again. Pulled the front clip off to get in there to replace the core support and inner fenders. also found a bit more rust in the cowl than i thought. Making some patches for the cowl that is rusted out.

Needs some finish welding and grinding.

Posted: **Sun Jul 15, 2012 1:07 am**

Very Nice!

Posted: **Sun Jul 15, 2012 6:58 am**

Good work Roberto. I know how hard you work and how you like things just right. Your buggy will be awesome. If I can return a favor and lend a hand in some way, let me know my friend!

Posted: **Tue Aug 07, 2012 6:40 pm**

Havent been working on it much but i did get the cowl all patched on both sides. Picked up a straight core support from phil. Just placed the order for all the remaining body panels to get this thing closer to paint.

Posted: **Sat Aug 11, 2012 9:48 am**

www.ColoradoClassicBroncos.com

74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.

Re: 74 explorer.