Re: project viperwolfe is starting
Posted: Wed Mar 30, 2016 6:02 pm
All I know is that the pictures don't do it justice
www.ColoradoClassicBroncos.com
A place for Coloradans to unite with our love of 66-77 Ford Broncos
https://www.coloradoclassicbroncos.com/
project viperwolfe is starting
Page 17 of 19
project viperwolfe is starting
Posted: Wed Mar 30, 2016 9:05 pm
If you need a 9" yoke I have one off my big bearing 9" Currie from my 69 that I replaced with a 1350 you can have.
Re: project viperwolfe is starting
Posted: Thu Mar 31, 2016 12:00 am
I see an OBA connection there! Did you mention your execution of that? York or electric pump? Tank? Either way, I have always thought of putting a port somewhere on the exterior of the bronco. I would also need to extend the wiring and put the switch inside the cab as opposed to under the hood.
Re: project viperwolfe is starting
Posted: Thu Mar 31, 2016 7:08 am
Jesus_man wrote:I see an OBA connection there! Did you mention your execution of that? York or electric pump? Tank? Either way, I have always thought of putting a port somewhere on the exterior of the bronco. I would also need to extend the wiring and put the switch inside the cab as opposed to under the hood.
Just a simple idea of using an unused port on the ARB compressor. No solenoid so it will have pressure whenever the compressor is on. I'll run the quick connect somewhere inside the front bumper.
Re: project viperwolfe is starting
Posted: Thu Mar 31, 2016 10:12 am
Got the grill on.
Re: project viperwolfe is starting
Posted: Thu Mar 31, 2016 10:40 am
Very nice, It'll be near 70 this weekend, time to stretch its legs!
Re: project viperwolfe is starting
Posted: Thu Mar 31, 2016 11:23 am
Viperwolf1 wrote:Got the grill on.
That is shaping up to be an incredible rig!
Re: project viperwolfe is starting
Posted: Thu Mar 31, 2016 11:46 am
That is very purdy. Nice work!
Re: project viperwolfe is starting
Posted: Thu Mar 31, 2016 1:37 pm
If you need help on Saturday I can swing by.
Re: project viperwolfe is starting
Posted: Thu Mar 31, 2016 1:44 pm
casadejohnson wrote:I think Rusty is just green with envy and decided to punish you for it.
Sent from my iPhone using Tapatalk
They will do that when you have more than one and spend time with the other....
Re: project viperwolfe is starting
Posted: Thu Mar 31, 2016 3:26 pm
B.O.B. wrote:If you need help on Saturday I can swing by.
That would be fantastic. The list of things to do is still pretty long; prep and paint cages and bumpers, install carpet, install soft top, mirrors, glass, etc. Jeff will also attempt to squeeze a 351w into too small of a space. Then the body lift will get installed.
Re: project viperwolfe is starting
Posted: Thu Mar 31, 2016 5:07 pm
Viperwolf1 wrote:B.O.B. wrote:If you need help on Saturday I can swing by.
That would be fantastic. The list of things to do is still pretty long; prep and paint cages and bumpers, install carpet, install soft top, mirrors, glass, etc. Jeff will also attempt to squeeze a 351w into too small of a space. Then the body lift will get installed.
Cant forget the run to bh for a hood/scoop to clear.
Re: project viperwolfe is starting
Posted: Thu Mar 31, 2016 5:29 pm
ZOSO wrote:Viperwolf1 wrote:B.O.B. wrote:If you need help on Saturday I can swing by.
That would be fantastic. The list of things to do is still pretty long; prep and paint cages and bumpers, install carpet, install soft top, mirrors, glass, etc. Jeff will also attempt to squeeze a 351w into too small of a space. Then the body lift will get installed.
Cant forget the run to bh for a hood/scoop to clear.
Contingency scoop already droning to me by Amazon
Re: project viperwolfe is starting
Posted: Fri Apr 01, 2016 7:33 pm
Got the front end all buttoned up.
Re: project viperwolfe is starting
Posted: Fri Apr 01, 2016 7:47 pm
Nice I will be dropping by tomorrow can't wait to see it in person
Re: project viperwolfe is starting
Posted: Sat Apr 02, 2016 4:48 pm
Looks better every day, did you source a soft top yet?
Re: project viperwolfe is starting
Posted: Sat Apr 02, 2016 6:40 pm
Re: project viperwolfe is starting
Posted: Sat Apr 02, 2016 6:55 pm
Big thanks to Bobby, Tim, Shawn and Chris for getting the bumpers and cage ready to bolt on. Jeff just played with his new engine the whole day.
Re: project viperwolfe is starting
Posted: Sat Apr 02, 2016 6:58 pm
Phil you look so relieved!
Re: project viperwolfe is starting
Posted: Sat Apr 02, 2016 7:49 pm
Beautiful
Re: project viperwolfe is starting
Posted: Sat Apr 02, 2016 9:39 pm
Ha nice getting the bumper on
Re: project viperwolfe is starting
Posted: Sun Apr 03, 2016 6:42 am
landshark wrote:Ha nice getting the bumper on
It fit really nicely despite condition of the frame ends.
Ran out of steam for getting the front one on.
That should get done today.
Re: project viperwolfe is starting
Posted: Sun Apr 03, 2016 10:12 pm
Looks amazing!
Re: project viperwolfe is starting
Posted: Wed Apr 06, 2016 7:52 am
4 days, No Pics?
C'mon, don't be modest!!!
C'mon, don't be modest!!!
Re: project viperwolfe is starting
Posted: Wed Apr 06, 2016 9:19 am
Tic Toc... Tic Toc!
Re: project viperwolfe is starting
Posted: Wed Apr 06, 2016 1:11 pm
Its like an episode of overhaulin' over at Jeff's house, lots to do and the deadline is swiftly approaching for the big reveal day.....
Rest assured, she sure is purdy, but you may have to wait for the super celebration threads to see finished product (as if that ever happens) pics are posted
Rest assured, she sure is purdy, but you may have to wait for the super celebration threads to see finished product (as if that ever happens) pics are posted
Re: project viperwolfe is starting
Posted: Thu Apr 07, 2016 8:44 pm
mickphatmac wrote:4 days, No Pics?
C'mon, don't be modest!!!
Patience my friends.........
Re: project viperwolfe is starting
Posted: Thu Apr 07, 2016 8:49 pm
Rox Crusher wrote:mickphatmac wrote:4 days, No Pics?
C'mon, don't be modest!!!
Patience my friends.........
Lame.
Re: project viperwolfe is starting
Posted: Thu Apr 07, 2016 9:06 pm
You could head over and help install a few parts you can check it out in person.....
Just one more day left before it heads east to TN
Just one more day left before it heads east to TN
Re: project viperwolfe is starting
Posted: Thu Apr 07, 2016 9:34 pm
hockeydad4-22 wrote:You could head over and help install a few parts you can check it out in person.....
Just one more day left before it heads east to TN
Yah- guess I should've waited to help with the finishing touches. I've got my own long list of things to do on my rig to have it ready for Moab.
Have fun guys!