www.ColoradoClassicBroncos.com

Well good news! BCB sent out the gas tank out a lot earlier than expected. Just received it a couple days ago.

That said, I've been out in the garage until midnight for the last week trying to make some headway. First a couple pics of the flares and emblems.





Got the new Centech harness almost finished up. The dash is almost done, headlights/taillights are done. Just need to finish the alternator/battery connections, windsheild wiper connections and mount the fuse box.





Also started mounting the gas tank. Anyone here mount a BCB tank on a 1977 frame? I have a few questions about the mounting brackets.

Nice work!!! Getting really close.

What questions do you have? Are there differences in a '77 frame compared to others?

J.D.

77s didn't use a tank strap, they had a bucket/skid that the gas tank sat in. Looks like I can use at least 2 of the original mounting holes. Just wanted to know if thats a problem.

dsmith01 wrote:77s didn't use a tank strap, they had a bucket/skid that the gas tank sat in. Looks like I can use at least 2 of the original mounting holes. Just wanted to know if thats a problem.

I couldn't get all the mounting points to align on my 77 either so ended up welding a couple of the mounts rather than drilling and tapping.

D - We were talking about ya last night, wondering how things were coming along. Cannot wait to see the pics, or even better, see that metallic paint in person! Really excited to see it.

Entourage wrote:D - We were talking about ya last night, wondering how things were coming along. Cannot wait to see the pics, or even better, see that metallic paint in person! Really excited to see it.

Just been finishing up a bunch of little stuff here and there. Still need to re-wrap the EFI harness but the wrap is in the mail and I should get it Mon-Tue. With that finished and a couple other little things I should be able to start her up.

Only problem, I need to set the timing - something I've never done. I'm also a little concerned about, well everything else I've installed/fabed myself. That said, is there anyone that could stop by next Saturday and A) help me set the timing and B) look things over to make sure I didn't screw anything up? Ample amounts of will be provided!

Made a lot of progress with the wiring on Sat-Sun. With some much needed assistance from Viperwolf1 I was able to get the the Centech harness and Mustang harness integrated.

I ended up using an Explorer power distribution box. Looks kindof like a rats nest right now but should clean up nice with some harness wrap.





I forgot about the Inertia switch and I'm out of room on the pass side so I'm now waiting for a used switch and the combo coolant/windsheild washer resevoir from BCB. Will hopefully get those before next weekend.

Feels like I'm close, I really want to !

Coming along...rats nest or not amazing amount of work!

Just started her up for the first time in 2 1/2 years! What a feeling!

Had to run down a few problems, though. Half the relays I picked up for the JY were trash. O2/MAF senser relay and ECC relays were bad. Guess that teaches me a lesson.

Timing was a PITA too. Since my balancer is marked on the 2 o-clock side and I have the explorer front dress with the timing marker on the 11 o clock side i had to find TDC the old fashoned way and re-mark the balancer.

All said and done - I guess it was a good day. Didn't have to hunt down any electrical gremlims and didn't smoke the computer

Now I just have to finish all the little stuff here and there.

That's awesome. Congrats.

Exciting to hear you are making progress. Sounds like you are almost to the finish line!

That's great!! I am excited for you as I know how much work you put into this bronco! Will be glad to see it on the road!

Making great progress..............

What's the chance we are gonna see it in action at the October 9 event at Platte River ?

Chances are good! I'm really excited to join part in one of the events.