Smoke problem on drivers side

Get answers to Bronco-related technical issues.
Post Reply
User avatar
laffycaffi
Official CCB Member
Official CCB Member
Posts: 278
Joined: Mon Oct 11, 2010 4:09 pm

Smoke problem on drivers side

Post by laffycaffi »

Recently IΓÇÖve been seeing white/grey smoke (not dark) from the drivers side along the headers.

Additionally IΓÇÖve noticed that the header wrap on that side seems to be burning off or eroding.

I had a crack in my ps pump and also a split in my ps pressure hose that saturated everything on that side with ps fluid. So yesterday I replaced both and pressure washed along the headers but after driving for about 20 min. The smoke remains. And it keeps smoking for a good bit after I turn off the engine.

It was so bad that I went back in the garage about 15 min after I came home and it. Was a so smoky and I could barely breathe just to grab my phone that I left in it.

Looking for ideas on this. Also I need to drive it to store at my dads house in Monument today. Bad idea? ItΓÇÖs running great otherwise.
User avatar
Justin
Official CCB Member
Official CCB Member
Posts: 6199
Joined: Sat Oct 09, 2010 11:04 pm

Re: Smoke problem on drivers side

Post by Justin »

Any reason you can't remove the wrap?
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: Smoke problem on drivers side

Post by Jesus_man »

Sounds like you have something dripping on the exhaust or simply residual PS fluid. Where there's smoke, there could be fire so be careful!
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
Post Reply