1/2 ton full width WMS

Get answers to Bronco-related technical issues.
Post Reply
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
Posts: 4077
Joined: Mon Jan 03, 2011 5:07 pm

1/2 ton full width WMS

Post by Gunnibronco »

I know there a few of you running these axles.

I'm curious if anyone has taken actual measurements of the WMS.

On line I have read the D44 is 65.5ΓÇ¥ and the 9" is 65". My measurements are both slightly wider with the D44 at 65-7/8" and the 9" at 65.5" (79 axles). I'm trying to match this width with my new axles.

It's not a big deal really I'm just curious why there is a discrepancy. Seems like they didn't include the rotor and drum thickness in the measurements.

For my new axles I'm going to match my actual measurements.

Sent from my E6910 using Tapatalk
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
Top
User avatar
Strike2
Posts: 809
Joined: Mon Nov 28, 2016 10:34 am

Re: 1/2 ton full width WMS

Post by Strike2 »

I have a 76 f150 44/9 on my bronco and the front 44 is 65-7/8 also.
Top
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
Posts: 4077
Joined: Mon Jan 03, 2011 5:07 pm

Re: 1/2 ton full width WMS

Post by Gunnibronco »

Thanks! Good to hear.

Sent from my E6910 using Tapatalk
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
Top
Post Reply

Return to “General 4x4 Technical”