Page 1 of 1
Champion radiator
Posted: Tue Aug 09, 2011 11:05 pm
by Justin
Ordered up a 3 core Champion Radiator. I've seen a few posts on CB that say you need the 4 core mounting brackets. Anyone know for sure if this is the case?
Re: Champion radiator
Posted: Wed Aug 10, 2011 3:29 am
by ManTruck
Justin, that is what I am using on mine.
Re: Champion radiator
Posted: Wed Aug 10, 2011 9:48 pm
by dalli
I put a three row Champion in mine early this summer. The stock brackets won't fit. I cut them and added I think about a half inch to extend them. The rubber insulators will stretch enough reach both edges. Or you could just buy the larger mounts. Also you need to check the clearance of the fan shroud to the fan after the install if you have a stock set up. Mine got modified real quick on the right side when first started up.
D
Re: Champion radiator
Posted: Wed Aug 10, 2011 10:29 pm
by Justin
Will do, thanks for the info guys.