Building and installing new full length track bar Saturday

Post by **landshark** » Thu Jul 27, 2017 7:34 am

I plan on building and installing a new full length track bar for my 69 this Saturday, I want to ditch the axle riser and move the axle mount to the passenger knuckle area. I should have everything I need to get this done in one day and would love a bit of help if anyone is around. Happy to provide drinks and food for anyone even if you stand around and make fun of my little garage ;)

I plan on starting around 8am, if anyone has time or wants a break from their boring weekend let me know!

Post by **Justin** » Fri Jul 28, 2017 7:54 pm

What are you running for a welder these days? Housings need some decent firepower.

Sent from my SM-T810 using Tapatalk

Post by **landshark** » Sat Jul 29, 2017 7:52 am

Running a Lincoln 180hd 220v

Post by **Justin** » Sat Jul 29, 2017 8:10 am

I'd suggest preheating the housing. The tube thickness is probably at least 3/8". If you want to use my welder you're welcome to.

Sent from my SM-T810 using Tapatalk

Post by **landshark** » Sat Jul 29, 2017 8:57 am

Justin wrote:I'd suggest preheating the housing. The tube thickness is probably at least 3/8". If you want to use my welder you're welcome to.

Sent from my SM-T810 using Tapatalk

Yup that's my plan. Preheat then final weld. Appreciate the offer let me see where iam at this afternoon.

www.ColoradoClassicBroncos.com

Building and installing new full length track bar Saturday

Building and installing new full length track bar Saturday

Re: Building and installing new full length track bar Saturd

Re: Building and installing new full length track bar Saturd

Re: Building and installing new full length track bar Saturd

Re: Building and installing new full length track bar Saturd