www.ColoradoClassicBroncos.com

Posted: **Wed Mar 21, 2018 8:32 am**

Can someone please take a quick measurement of the top of the windshield frame? the area where the seal sits for the hardtop/soft-top.

I just need to know the depth at the top of the windshield, ie Front to Back and the approx. center location of bolt holes if possible. assume they are centered.

Posted: **Wed Mar 21, 2018 2:55 pm**

I pulled up the model of my windshield frame. (I'm at work)

The depth of the frame (fore/aft) on my truck measured 1.444". The holes were centered, 0.722" from either edge.

Being is was designed in the 60's, my guess is that the target nominal was 1-7/16" (1.4375")

www.ColoradoClassicBroncos.com

Need the depth of the windshield frame measured.

Need the depth of the windshield frame measured.

Re: Need the depth of the windshield frame measured.