Opinion on Powder Coating

Post Reply
User avatar
TOOLMAN
Official CCB Member
Official CCB Member
Posts: 768
Joined: Mon Feb 14, 2011 9:29 am

Opinion on Powder Coating

Post by TOOLMAN »

All,

I wanted to know your opinion on the powder coating finishes on the Duff long arms. I got the silver vein finish, but one is clearly just silver. I don't think they match at all. What would you do?
You do not have the required permissions to view the files attached to this post.
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
B.O.B.
Official CCB Member
Official CCB Member
Posts: 777
Joined: Thu Nov 11, 2010 9:31 am

Re: Opinion on Powder Coating

Post by B.O.B. »

That sucks. I would contact them and s nd them pics. See if they will either ship you some new ones or discount the price. The thing that would suck though if you had to pay to ship the others back. From what I hear Duffs really take care of their custom rs so I think you would be okay.
71' bronco, np435 w/trailbanger, 302 efi, 35" KM3 on 17x9 Fuel Anza, warn xd9000i, cage arms, 5" lift
User avatar
BroncoRaider
Official CCB Member
Official CCB Member
Posts: 536
Joined: Thu Oct 22, 2015 10:47 am

Re: Opinion on Powder Coating

Post by BroncoRaider »

Agree with Bobby. Just be thankful they arenΓÇÖt from some other vendors that are notoriously difficult to deal with....
ΓÇ£BuddyΓÇ¥ - 1975 Bronco Sport, 302/Viperbuilt 4R70W/D20, Explorer EFI, More Patina than Paint...
User avatar
landshark
Official CCB Member
Official CCB Member
Posts: 3942
Joined: Thu Oct 13, 2011 11:16 pm

Re: Opinion on Powder Coating

Post by landshark »

i would do the same, contact and see what they are willing to do. if it were me i wouldn't sweat it too much as you hopefully will never see them together, if you do then your probably doing it wrong like i did once...
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
User avatar
ScottBarnes
Official CCB Member
Official CCB Member
Posts: 415
Joined: Fri Nov 25, 2011 6:34 am

Re: Opinion on Powder Coating

Post by ScottBarnes »

That would drive me insane. Call them and IΓÇÖd bet a corona theyΓÇÖll take care of it.
Go Hard or Go Home
User avatar
TOOLMAN
Official CCB Member
Official CCB Member
Posts: 768
Joined: Mon Feb 14, 2011 9:29 am

Re: Opinion on Powder Coating

Post by TOOLMAN »

landshark wrote:i would do the same, contact and see what they are willing to do. if it were me i wouldn't sweat it too much as you hopefully will never see them together, if you do then your probably doing it wrong like i did once...


I wouldn't sweat it too much either, usually. But I did spend nearly $1k there and spent extra for the silver vein!
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
User avatar
TOOLMAN
Official CCB Member
Official CCB Member
Posts: 768
Joined: Mon Feb 14, 2011 9:29 am

Re: Opinion on Powder Coating

Post by TOOLMAN »

ScottBarnes wrote:That would drive me insane. Call them and IΓÇÖd bet a corona theyΓÇÖll take care of it.


I'll take that bet...if you make it a Miller Lite on my end!
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
User avatar
TOOLMAN
Official CCB Member
Official CCB Member
Posts: 768
Joined: Mon Feb 14, 2011 9:29 am

Re: Opinion on Powder Coating

Post by TOOLMAN »

Called and sent them pictures. Here's their response:

Hi Jason. Thank you for bringing this to our attention. We checked and found others that had a similar difference in pigment. We verified that there is no issue with strength or durability to the finish its just aesthetically different. We were also told it is not uncommon to see silver vein with a tight stitch do this especially on tubing. Please let us know if there is anything else we can do to help.

Sincerely,

Tech support
James Duff Inc.

I sent a response to the effect that it has nothing to do with the pigment, it has to do with one has vein and one doesn't. We'll see what they say. I don't want to do it, but I may have to get a little noisy on the national site.
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
User avatar
mickphatmac
Official CCB Member
Official CCB Member
Posts: 1810
Joined: Fri Mar 16, 2012 9:26 am

Re: Opinion on Powder Coating

Post by mickphatmac »

On one hand IΓÇÖm with the guys that say no biggie, youΓÇÖll never see them both at the same time and theyΓÇÖll both look great no matter what!!!

BUT...

On the other hand were talkin ΓÇÿbout PRINCIPALITIES MAN!!!

If you paid extra for it and they didnΓÇÖt deliver then I would demand your money back!

YouΓÇÖre talking about the national site, (CB.com) I would also go onto Facebook where they have a huge presence and a huge following of sheep...Me Included... I would bet that if you tag Michael Duff James Duff Susie Duff you would get lots and lots and lots of responses! And it would just be a matter of time before they made it right!
I drink Bud Light by the way ;)
1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: Opinion on Powder Coating

Post by Jesus_man »

Yeah, I would ask to be refunded the "special paint" portion at the very least. It'd be one thing if they matched, but they clearly do not. And if you are not installing these on a show truck, then not many folks will ever know they were different.

Before you go national, I would make them aware of your expectations and what you think is fair. If there is no leeway, then you might need to escalate the issue.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
ZOSO
Moderator
Moderator
Posts: 3910
Joined: Mon Nov 15, 2010 4:58 pm

Re: Opinion on Powder Coating

Post by ZOSO »

Hey what was the shipping cost? Im looking to order a set soon.
Rob

74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.

04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine

New project: 77 Bronco Ranger, body work and more body work.

Very little left of a 72 durango tan explorer sport
User avatar
Viperwolf1
Official CCB Member
Official CCB Member
Posts: 1485
Joined: Tue May 07, 2013 9:37 pm

Re: Opinion on Powder Coating

Post by Viperwolf1 »

ZOSO wrote:Hey what was the shipping cost? Im looking to order a set soon.
You should order one silver and one silver vein.
User avatar
TOOLMAN
Official CCB Member
Official CCB Member
Posts: 768
Joined: Mon Feb 14, 2011 9:29 am

Re: Opinion on Powder Coating

Post by TOOLMAN »

ZOSO wrote:Hey what was the shipping cost? Im looking to order a set soon.


I didn't have them shipped. I got lucky because my brother lives in Knoxville and he brought them out when he came out for a visit. Sorry I can't help you with that.
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
User avatar
TOOLMAN
Official CCB Member
Official CCB Member
Posts: 768
Joined: Mon Feb 14, 2011 9:29 am

Re: Opinion on Powder Coating

Post by TOOLMAN »

Viperwolf1 wrote:
ZOSO wrote:Hey what was the shipping cost? Im looking to order a set soon.
You should order one silver and one silver vein.


Too funny Phil.... icon biggin
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
User avatar
Friday
VENDOR
VENDOR
Posts: 160
Joined: Sun Nov 14, 2010 8:24 pm

Re: Opinion on Powder Coating

Post by Friday »

I'd contact Doghows72 on the CB site, (he is a powder coater guy) just to see what he thinks of the pics and the explanation that Duffs' gave on why they are different.
User avatar
ZOSO
Moderator
Moderator
Posts: 3910
Joined: Mon Nov 15, 2010 4:58 pm

Re: Opinion on Powder Coating

Post by ZOSO »

TOOLMAN wrote:
ZOSO wrote:Hey what was the shipping cost? Im looking to order a set soon.


I didn't have them shipped. I got lucky because my brother lives in Knoxville and he brought them out when he came out for a visit. Sorry I can't help you with that.


Dang If I would have known....
Rob

74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.

04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine

New project: 77 Bronco Ranger, body work and more body work.

Very little left of a 72 durango tan explorer sport
User avatar
TOOLMAN
Official CCB Member
Official CCB Member
Posts: 768
Joined: Mon Feb 14, 2011 9:29 am

Re: Opinion on Powder Coating

Post by TOOLMAN »

ZOSO wrote:
TOOLMAN wrote:
ZOSO wrote:Hey what was the shipping cost? Im looking to order a set soon.


I didn't have them shipped. I got lucky because my brother lives in Knoxville and he brought them out when he came out for a visit. Sorry I can't help you with that.


Dang If I would have known....


You probably weren't even thinking about it. He brought them to me just about the time you probably broke your long arm. Same weekend!
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
User avatar
sykanr0ng
Official CCB Member
Official CCB Member
Posts: 405
Joined: Thu Jan 22, 2015 12:46 am

Re: Opinion on Powder Coating

Post by sykanr0ng »

TOOLMAN wrote:Called and sent them pictures. Here's their response:

Hi Jason. Thank you for bringing this to our attention. We checked and found others that had a similar difference in pigment. We verified that there is no issue with strength or durability to the finish its just aesthetically different. We were also told it is not uncommon to see silver vein with a tight stitch do this especially on tubing. Please let us know if there is anything else we can do to help.

Sincerely,

Tech support
James Duff Inc.

I sent a response to the effect that it has nothing to do with the pigment, it has to do with one has vein and one doesn't. We'll see what they say. I don't want to do it, but I may have to get a little noisy on the national site.


What I read this 'response' as is: 'Sux to be you.'

Does not seem to be them offering anything to make it right, really odd considering Duff's reputation for customer service.
"You say overkill like it's a bad thing."
User avatar
cpldavis37
Official CCB Member
Official CCB Member
Posts: 357
Joined: Sun Oct 16, 2011 6:45 pm

Re: Opinion on Powder Coating

Post by cpldavis37 »

If you used a credit card to purchase them and they are refusing to help you, you can reverse the charges. My friend had to do it with an online company. He ordered 1500 worth of body panels for his chevy. They were all dented and they refused to take them back. He reversed the charges and got all his money back. The company then sent him shipping labels and asked that he return everything. By that time he had thrown it all in the trash, so they were crap out of luck. Just an idea if they wont make it right.
TJ
"Everyone suspects himself of at least one of the cardinal virtues, and this is mine: I am one of the few honest people I have ever known."
F. Scott Fitzgerald
1974 Ford Bronco 3 1/2 inch James Duff lift ,2 inch body lift, 351w Explorer EFI, Viper built c4, Viper built Dana 20 with wildhorses twin stick, Kinder built Dana 44 with 4.56 gears disc brakes aussie locker and knuckle over conversion, Kinder built 9 inch with grizzly locker 31 spline axles and 4.56 gear
User avatar
TOOLMAN
Official CCB Member
Official CCB Member
Posts: 768
Joined: Mon Feb 14, 2011 9:29 am

Re: Opinion on Powder Coating

Post by TOOLMAN »

Just wanted everyone to know Michael with Duff's and I came to an agreement and this issue has been resolved to my satisfaction!
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
User avatar
mickphatmac
Official CCB Member
Official CCB Member
Posts: 1810
Joined: Fri Mar 16, 2012 9:26 am

Re: Opinion on Powder Coating

Post by mickphatmac »

C'mon!
Lay it on us man!
1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
User avatar
BroncoRaider
Official CCB Member
Official CCB Member
Posts: 536
Joined: Thu Oct 22, 2015 10:47 am

Re: Opinion on Powder Coating

Post by BroncoRaider »

TOOLMAN wrote:Just wanted everyone to know Michael with Duff's and I came to an agreement and this issue has been resolved to my satisfaction!


Glad to hear!
ΓÇ£BuddyΓÇ¥ - 1975 Bronco Sport, 302/Viperbuilt 4R70W/D20, Explorer EFI, More Patina than Paint...
Post Reply